AnyDVD Problem

Discussion in 'AnyDVD HD (DVD issues)' started by dynnlickey, Feb 20, 2007.

  1. dynnlickey

    dynnlickey Member

    I saw another person belittled on CDFreaks with this problem, so please take it easy on me. After downloading the latest AnyDVD update, my burning software does not recognize the existence of a blank disc in my burning drive
    (TSSTCORP DVD+-RW TS-H653A D300 1009). Likewise, AnyDVD, which used to recognize the media in the drive as something along the lines of "blank recordable media" indicates that "No Disc is present in Drive E:!"

    My son recently downloaded iTunes, and I initially blamed it on a conflict with that software. However, I removed that software and still have the problem. I rolled back AnyDVD to a prior version, but still have the problem. I have also done an uninstall/reinstall to no avail.

    Any ideas as to why this may be happening. I have been successfully using AnyDVD with both CloneDVD2 and 1ClickDVD for quite some time, but my good fortune has apparently come to any end. Thanks in advance for your efforts.

    Kraig
     
  2. Webslinger

    Webslinger Retired Moderator



    1. Use http://forum.slysoft.com/showthread.php?t=1663

    2. visit http://forum.slysoft.com/showthread.php?t=321 (do step 8 for me please with a commercial dvd movie)

    Stick a movie dvd in the drive, and do step 8 please.
     
    Last edited: Feb 20, 2007
  3. Webslinger

    Webslinger Retired Moderator


    If the movie information is showing in this step, then Anydvd is working properly.

    from http://forum.slysoft.com/showthread.php?t=1559

    "If Anydvd says your drive is disabled, ignore the message unless you also receive it when you have a movie inserted in that drive. Some drives' firmware may report the wrong information to Anydvd. Often Anydvd will still function properly. visit http://forum.slysoft.com/showpost.php?p=2891&postcount=12
    (Zebedee's Anydvd works fine)"

    If Anydvd is giving you no information when a movie is in your optical reader--then you have a problem. And if that is happening, visit http://forum.slysoft.com/showthread.php?t=1559 and read fully please

    Thank you
     
  4. dynnlickey

    dynnlickey Member

    Still having problems

    Thanks for the lightning-fast response. I did Step 1, and I still have the same problem. I put in a commercial movie, and I have the same problem with a pre-recorded disc as I do with a blank disc. Here is my "Status":

    No Disc is present in Drive E:!
    TSSTCORP DVD+-RW TS-H653A D300 1009

    I inserted the same movie into my Drive D, and the movie loaded just fine. Thanks again.

    Kraig
     
  5. Webslinger

    Webslinger Retired Moderator

    You get this message with a movie in that drive, yes?

    1) Disable Anydvd (right click-->exit). Look in Windows Explorer (go to E: ). Do you see a video_ts folder?
    Do you see anything at all?

    2) Will the movie play from your E: drive with Anydvd disabled?
     
  6. dynnlickey

    dynnlickey Member

    Update

    I followed the instructions on your second submission to no avail. I am not certain how to "uninstall your Busmaster IDE driver crap!", if that is in fact the problem. Thanks again.
     
  7. Webslinger

    Webslinger Retired Moderator

    http://club.cdfreaks.com/showpost.php?p=1455402&postcount=3

    Before doing that though look at my previous response please.
     
  8. dynnlickey

    dynnlickey Member

    I have nothing

    NO!

    It is a new computer. Perhaps my issue is with Dell, and not AnyDVD. Do you agree?
    Thanks.
     
  9. Webslinger

    Webslinger Retired Moderator

    Then it's not an Anydvd issue. Anydvd can't work if your drive doesn't work. When Anydvd is disabled, it's not running, so that eliminates Anydvd being at fault.

    Uninstall Anydvd. Keep your license key file backed up. Try again. Can you read anything from using your E: drive? Can you get the movie to play? If not, there's no way Anydvd can be at fault.

    Start-->All programs-->Slysoft--->Anydvd-->uninstall
     
    Last edited: Feb 20, 2007
  10. dynnlickey

    dynnlickey Member

    Thanks

    Thank you very much. Sorry to take up your time. I should have checked that other stuff, but the death of the drive coincided directly with the installation of the new AnyDVD, so I just assumed it was an AnyDVD issue, especially when I saw others with similar problems. Thanks for the unbelievably quick, effective assistance.

    Kraig
     
  11. Webslinger

    Webslinger Retired Moderator

    Uninstall Anydvd. Keep your license key file backed up safely. Try again. Can you read anything from using your E: drive? Can you get the movie to play? If not, there's no way Anydvd can be at fault.

    Start-->All programs-->Slysoft--->Anydvd-->uninstall
     
  12. DetroitBaseball

    DetroitBaseball Well-Known Member

    Dang Webslinger, it seems like you are continually pressing F5 waiting for a response.
     
  13. Webslinger

    Webslinger Retired Moderator

    I like to fix stuff quickly--and ensure it stays fixed. But no . . . I'm not hammering the site too much, I think. :D
     
    Last edited: Feb 20, 2007
  14. DetroitBaseball

    DetroitBaseball Well-Known Member

    You're practically performing a denial of service attack on the server. ;) ;) ;)
     
  15. Webslinger

    Webslinger Retired Moderator

    I wonder if dynnlickey will follow up with another post. If not, I guess it's not an Anydvd issue.
     
  16. Webslinger

    Webslinger Retired Moderator


    I wasn't sure if you tried uninstalling Anydvd, so I didn't really respond to what you wrote. Anyway, you didn't take up my time, and thank you for your kind words.
     
  17. mmdavis

    mmdavis Well-Known Member

    Time

    Yep, that's why they pay you the BIG bucks.
     
  18. Webslinger

    Webslinger Retired Moderator

    They pay me by the second. ;)