anyDvD:....any dvd isnt finding any protection

Discussion in 'AnyDVD HD (DVD issues)' started by Sbtv83, Oct 25, 2007.

  1. Sbtv83

    Sbtv83 New Member

    I have tried to put in 3 different dvd's and after each dvd is scanned it lists the types of possible protection, it says none found. I have some other dvd's on my HD that I can burn to dvd so i know its not either one of my burners. Any suggestions would be welcome.
     
  2. Webslinger

    Webslinger Retired Moderator

    I'm have trouble understanding your problem. Are you saying Anydvd isn't detecting the original disc?

    1. Use Anydvd 6.1.8.6: click http://forum.slysoft.com/showthread.php?t=8882

    2. a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the problematic disc in your optical drive/reader.
    f) Go to your My Documents folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"
     
  3. Sbtv83

    Sbtv83 New Member

    Yeah, I suppose i wasnt very clear. I own anyDvD also I own CloneDvD. When I put a Dvd into my dvd rw drive. anydvd will say please wait will it is scanned. So I wait. I then open up CloneDvd. After it gets to about 10% on *ALL* dvd's it comes up with a dvd protection error. And sure enough i open up anyDvD and it says that no protection was found on the dvd. So from the looks of it anyDvD is not functioning the way it should by removing the protection from all DvD's.

    The dvd's i tried to burn were Knocked Up, Mister Brooks, and The Departed.
     
  4. Webslinger

    Webslinger Retired Moderator

    O.k. Please follow the steps:

    1. Use Anydvd 6.1.8.6: click http://forum.slysoft.com/showthread.php?t=8882

    2. a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the problematic disc in your optical drive/reader.
    f) Go to your My Documents folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"

    3. i. For XP with ide burners
    Click this

    Do what it says to do if you have XP and an ide burner/optical drive.

    ii. For Vista with ide burners

    Go into device manager, and check to ensure you're using standard Microsoft ide busmaster drivers.

    Right click on your PCI IDE Bus Master controller, and remove it. Ensure that it also removes the driver for your DVD/CD rom. Reboot. Your system should find hardware. After your system is finished installing hardware, reboot again.

    click http://forum.slysoft.com/showpost.php?p=48880&postcount=20 to get a better idea of what I'm asking for if you're using Vista.
     
  5. Sbtv83

    Sbtv83 New Member

    ok here are the logs. Any Idea's?
     

    Attached Files:

  6. Webslinger

    Webslinger Retired Moderator

    You didn't do step 1 for starters . . .

    But do step 1, and if that doesn't work disable the AI scanner in Anydvd.
     
  7. Sbtv83

    Sbtv83 New Member

    alright, I finially got anydvd to rip to hard drive but now when i try to burn the dvd it gets to 4% and reboots my comp. Let me install the new version of anydvd but would that have anything to do with clonedvd rebooting my comp?
     
  8. Webslinger

    Webslinger Retired Moderator

    No. It wouldn't. That sounds like an overheating (check case fan for dust) or bad/weak power supply issue.