Any DVD HD not reading movie "Redbelt"

[Skot73]

I ve looked up in the forum and cannot find any related issue regarding Any DVD HD not reading a DVD. I recently upgraded to lastest version. When i put in the movie "Redbelt" Brand new on Disc by the way, Reading disc comes up as usual, but wont complete. DVD starts clicking and all programs lock up. Only way to get out is useing Task Manager. To quit. I checked my Firmware and there are no updates. TDK 880N player/ writer. Never had an issue before. After trying DVD Shrink, DVD Decrypter I finally got through on DVD Clone Platinum and wroked fine. Any thoughts at all????? Oh, This happened on ver. 6.1.4 also, Thats way I updated.

 

[Webslinger]

I ve looked up in the forum and cannot find any related issue regarding Any DVD HD not reading a DVD.

A. Perhaps you didn't look at Frequently Asked Questions (READ BEFORE YOU POST)

"5. Anydvd can't see or detect my original dvd-video movie disc (or my drives can read cds and not dvds or vice versa). What should I do?

a) Keep your license key file backed up safely
b) Uninstall Anydvd (start-->all programs-->Slysoft--->Anydvd-->Uninstall)
c) Reboot
d) Check to see if your system ("my computer") now reports a disc in drive. Do you see a video_ts folder (if you're using a dvd)? Do you see folders or files?

If the answer is "no" to "d)", then Anydvd isn't your problem. As Anydvd is not on your system, Anydvd can't interfere or block the reading process. Possibly your reader or burner is slowing dying, the original disc is bad, or a number of other possibilities exist as well (including messed up ide/sata busdrivers, bad cable on the back of the drive, etc.)

If the answer is "yes", click http://forum.slysoft.com/showthread.php?t=1559 and follow the steps (note that step 4 requires you to post information)"


B. Also visit http://forum.slysoft.com/showthread.php?t=15536

Also, the Anydvd HD forum is for Blu-ray and HD-DVDs only.

I recently upgraded to lastest version.

1. Use Anydvd 6.4.6.7 beta: click http://sandbox.slysoft.com/beta/SetupAnyDVD6467.exe


You may need to reboot after installing if prompted to do so.

2. Click the red fox icon on your toolbar. Click "default". Click "ok".

3. If you use DVDShrink, Nero Recode, or programs that generally can't handle structural protections, right-click on the fox icon on your toolbar and select "Rip video-dvd to Hard Disk". Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish. You can then import that rip into whatever program you want. This is an important step if the original disc contains structural protection.

click http://forum.slysoft.com/showthread.php?t=3992 and read fully

You don't need to do this if you own Clonedvd or are planning to make a backup with Clonecd.


4. Use Clonedvd 2.9.1.9: click http://static.slysoft.com/SetupCloneDVD2919.exe

5. Follow the steps from this link in order: click http://forum.slysoft.com/showthread.php?t=476 (follow them step by step)

If you're using +R DL blank discs, I recommend using Clonecd: click http://forum.slysoft.com/showthread.php?t=327


6. If you still have problems, then . . .

A)
a) Ensure Anydvd is running.
b) Put the problematic original movie dvd in your burner. Wait for Anydvd to scan the disc.
c) Right click the red fox icon on your toolbar.
d) Select "Create Logfile"
e) Wait for Anydvd to create a log file.
f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
g) Go to your My Documents folder
h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
i) When replying or posting in the Slysoft forums, look for the icon that looks like

(in other words, look for the paperclip after clicking "quote" or when creating a new thread)
j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
l) Click the "Browse" button, and locate and select the .zip file you created.
m) click "upload"
n) Close the window. When you submit reply, or submit a new thread, the .zip file will be attached automatically for us to take a look at


B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?


C) Click http://forum.slysoft.com/showthread.php?t=5091 to see if your question has already been answered

D) Provide the Clonedvd log file after Clonedvd has finished--or after you receive an error message.

i)In the white area under the tab labelled "Log", right click and select "save as".
ii)Select where you want to save the log, and then save it.
iii) The log will be a .txt file. Zip it up using Winzip or another program. If the text file is small enough, you should be able to upload it anyway. Otherwise, use Winzip.
iv) When replying or posting in the Slysoft forums, look for the icon that looks like

(in other words, look for the paperclip after clicking "quote" or when creating a new thread)
v) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
vi) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
vii) Click the "Browse" button, and locate and select the .zip file (or .txt file) that you created.
viii) click "upload"
ix) Close the window. When you submit reply, or submit a new thread, the .zip file will be attached automatically for us to take a look at