Ant-Man And The Wasp

Discussion in 'AnyDVD HD (Blu-ray issues)' started by mlipar, Oct 16, 2018.

  1. mlipar

    mlipar Member

    anydvd will not copy uhd disk
    are you working on this?
  2. Ch3vr0n

    Ch3vr0n Translator NL

    Please read this, it'll tell you all you need know
  3. mlipar

    mlipar Member

    read about your computer and your tv
    that does not help me at all
    and if you don't work for RedFox my question was not for you
  4. Ch3vr0n

    Ch3vr0n Translator NL

  5. aaronwt

    aaronwt Well-Known Member

    I assume this shouldn't be a problem for Any DVD HD since MakeMKV can already work with the Ant Man and the Wasp UHD BD.
  6. Ron Cook

    Ron Cook Member

    I don't understand. I am ripping .mp4 data from Blu-Ray of this movie using Handbrake. I set-up Source scan and proper destination file with plenty memory. After starting transfer, operation works perfectly until approximately 6 1/2 minutes into process and shuts down with verbiage stating "Queue Finished" in lower left-hand corner of Handbrake Window. I have used Handbrake many times and never hade this happen. Please help.

  7. testiles

    testiles Well-Known Member

    Ron Cook, the OP was referring to Ant Man and the Wasp UHD, which is not yet supported by AnyDVD.

    Ant Man - Wasp Blu Ray is supported. I have a copy and had no issues with it.

    Of course, that has no bearing on your issue as you may have a different version.

    Sounds like you have a Handbrake problem but if you think AnyDVD is instead the culprit, you should attach an AnyDVD log file.

    The screenshot you posted is not enough for the devs to properly diagnose.

  8. mlipar

    mlipar Member

    I guess nobody is going to answer my question? :(
  9. Pete

    Pete Forum Admin Staff Member

    Please check out my private message.
    BRCS likes this.
  10. Pete

    Pete Forum Admin Staff Member

    Do you have the UHD version as well?
  11. testiles

    testiles Well-Known Member

  12. mlipar

    mlipar Member

    UHD disk is now fixed
    Thank you Pete :)
  13. rocker69

    rocker69 Member

    Thank You Pete :thankyou: