american gangster and 101 dalmations

Discussion in 'AnyDVD HD (DVD issues)' started by soonern88, Mar 5, 2008.

  1. soonern88

    soonern88 Member

    I am having problems with these two titles as well. and its giving me the message of going to get a patch like everyone else. american gangster and 101 dalmations are brand new just out of the box. what can i do?
     

    Attached Files:

  2. Webslinger

    Webslinger Retired Moderator

    Do not post in other people's troubleshooting threads unless you wish to assist them please. click http://forum.slysoft.com/showpost.php?p=87585&postcount=4 and read fully. Thank you

    1. Use Anydvd 6.3.1.6 beta: click http://forum.slysoft.com/showpost.php?p=92414&postcount=1

    You may need to reboot after installing if prompted to do so.

    2. Click the red fox icon on your toolbar. Click "default". Click "ok".

    3. If you use DVDShrink, Nero Recode, or programs that generally can't handle structural protections, right-click on the fox icon on your toolbar and select "Rip video-dvd to Hard Disk". Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish. You can then import that rip into whatever program you want. This is an important step if the original disc contains structural protection.

    You don't need to do this if you own Clonedvd or are planning to make a backup with Clonecd.


    4. Use the latest Clonedvd: click http://forum.slysoft.com/showpost.php?p=84511&postcount=1

    5. Follow the steps from this link in order: click http://forum.slysoft.com/showthread.php?t=476 (follow them step by step)

    If you're using +R DL blank discs, I recommend using Clonecd: click http://forum.slysoft.com/showthread.php?t=327

    6. If you still have problems, then . . .

    A) a) Ensure Anydvd is running.
    b) Put the problematic original movie dvd in your optical drive/reader. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"


    B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?


    C) click http://forum.slysoft.com/showthread.php?t=5091 to see if your question has already been answered
     
  3. DSTREAM

    DSTREAM Member

    101 dalmation ripped fine for me

    attached the log file of the shop disc
     

    Attached Files:

  4. soonern88

    soonern88 Member

    I am still getting that message about the rpc1 and i even just purchased dvd clone thinking it might be my software. I am at confused.
     

    Attached Files:

  5. Webslinger

    Webslinger Retired Moderator

    You haven't done anything I wrote. You have not updated Anydvd. You have not provided me with a full error message. Go through the steps I outlined in my initial reply in the order that they are listed in.
     
    Last edited: Mar 5, 2008
  6. soonern88

    soonern88 Member

    WARNING!

    failed to read DVD!

    1. -DVD media is dirty
    2. -DVD media is damaged
    3. -Your drive is a region locked RPC2 drive, which does not allow reading of scrambled sectors from a different region and you try to read a DVD from a different region. Known drives having this problem are Ricoh/philips DVD writers and Matshita/Panasonic DVD readers and writers. You can try to find a RPC1 Patched firmware at http://www.rpc1.com
    4. -Your drive is an RPC2 drive that has not yet been assigned a Region. try to assign one or try to find a RPC1 patched firmware at http://www.rpc1.com.

    the only thing that i can find on that site is that DVD region free + css download.
     

    Attached Files:

  7. Webslinger

    Webslinger Retired Moderator

    etc.

    The original disc is damaged or your drive is dying.

    Here are your options:

    1. Clean the disc. Try again.

    2. Replace the damaged disc.

    3. Try a different drive
     
  8. soonern88

    soonern88 Member

    on the warning that AnyDVD is giving me that tells me to go to that rpc1.com site i found my burner but there is no firmware for it. I use dvd shrink and the newest dvdclone along with the newest beta version of Anydvd 6.3.1.6. I dont know what i need to do.
     
  9. Webslinger

    Webslinger Retired Moderator


    The original disc is damaged or your drive is dying (or your drive is inferior at reading defective dvds than other drives).

    Here are your options:

    1. Clean the disc. Try again.

    2. Replace the damaged disc.

    3. Try a different drive
     
  10. soonern88

    soonern88 Member

    since the dvds are brand new out of the box i need to go buy a new dvd burner?
     
  11. Webslinger

    Webslinger Retired Moderator

    No. Brand new discs can be faulty--even if they play fine.

    Provided other dvds do not give you that error message, I would exchange the dvds. If most dvds give you that error message, then it's time to get a new drive.
     
    Last edited: Mar 5, 2008