6607 problems with 1Click to DVD

Discussion in 'Third Party Products' started by bobafett22, Dec 18, 2009.

  1. bobafett22

    bobafett22 Member

    i am having trouble backing up the newer US movies of late,such as STAR TREK,Terminator Salvation,Transformers R.O.T.F and Up.i am using 1 Click DVD along with AnyDVD.I have never had this much troble getting new movies.can anybody shed any light on my situation?
     
  2. Carolina Mike

    Carolina Mike Well-Known Member

    1. Update to 6608. Rip the HD first and then use 1 ClickDVD.
    2. Or use Any DVD w/ 1 click , ensure CPRX is disabled in 1 click
     
  3. bobafett22

    bobafett22 Member

    these are just regular dvds,1 click recomends not disabling the CPRX.
     
  4. RedFox 1

    RedFox 1 Super Moderator

    Wrong, if you use AnyDVD, you have to disable their CPRx, you got it backwards. ;) Thats your whole problem, you can only use one decrypter at a time. I know 1ClicktoDVD very well. After CloneDVD2 it is the best program out there , just my opinion of course.
     
  5. Clams

    Clams Well-Known Member

    Yes it is. You MUST disable CPRx in 1Click - let AnyDVD do ALL the work.

    -W
     
  6. bobafett22

    bobafett22 Member

    i tried to disable 1click still dint work!so witch is it?i installed the beta update6608.still doesn't work the U.S. dvds:mad:
     
    Last edited: Dec 19, 2009
  7. Carolina Mike

    Carolina Mike Well-Known Member

    bobafett22
    Try right clicking the Fox head in the taskbar. Go to rip video disc to harddisk. Now rip the disk to the HD. Then try 1 click. If the disk fails to rip properly then there is a problem w/ the disk or your burner is failing to read the disk properly. I ripped 3 of the 4 movies you are doing w/ no problem. I then used DVD Rebuilder-Pro to process the data.
     
  8. bobafett22

    bobafett22 Member

    ill give it a try
     
  9. Clams

    Clams Well-Known Member

    Remember... most all of us here already did these US titles with AnyDVD.
    In fact, I did all four of them with no problems.
    If you can't get a good rip with the AnyDVD ripper. You need to go to the top of the board... read the stickies... and POST the information and the AnyDVD LOG FILES that are needed to help you.

    Know that AnyDVD handles these titles just fine...
    You have a problem. Tone it down a little and people will help you.

    -W
     
  10. RedFox 1

    RedFox 1 Super Moderator

    It does if you right click and uncheck CPRx in 1Click. If that doesnt work you will have to ask 1Click why, cause it works for everyone else using the software. Perhaps you have a badly stamped disc.
     
  11. bobafett22

    bobafett22 Member

    after i ripp the movie can i get it back out through 1click
     
  12. bobafett22

    bobafett22 Member

    after i ripp the movie can i burn it back out with 1click
     
  13. shannon90210

    shannon90210 Well-Known Member




    Could you also please -

    Right Click on the AnyDVD fox in your Sys tray
    > Settings > Video DVD > Settings
    >> Press the Default Button

    ... Copy and Paste\ Post your AnyDVD "Status" Report ?

    > Insert the Original Disc into your "Source" drive
    > Allow AnyDVD to recognize the Disc
    > Right Click on the AnyDVD Fox > Settings > Status
    >> Copy and Paste the Disc info


    .... as such :

    Summary for drive R: (AnyDVD 6.6.0.8)
    TSSTCORP CDDVDW SH-S223Q SB03 1219
    Drive (Hardware) Region: 1

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 2040880 sectors (3986 MBytes)
    Total size: 4046768 sectors (7903 MBytes)

    Video DVD (or CD) label: UP
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1!

    Found & removed structural copy protection!
    Found & removed invalid cell pieces!
    Found & removed bogus title set(s)!
    Found & removed invalid VOBUs!
    RCE protection not found.
    UDF filesystem patched!
    Autorun not found on Video DVD.
    Found & removed 16 potential bad sector protections!

    Emulating RPC-2 drive with region 1!




    "UP" > Issues Using AnyDVD 6.6.0.8



    ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^


    On certain Discs with a Status Report like the one posted above,
    You may need to employ the "Wall-E Strategy"

    You have two choices - both work

    Either this :
    This is how it's done ......Using the AnyDVD"Ripper"


    or This :
    This is how it's done ......Using 1Click's CPRx with AnyDVD





    I had no trouble ... I just used the AnyDVD"Ripper" first
    - No Sweat
    The CPRx method works Also ...



    :)
     
    Last edited: Dec 19, 2009
  14. Carolina Mike

    Carolina Mike Well-Known Member

    bobafett22,
    After you rip the movie to the HD then yes you can use 1 click to burn it
     
  15. bobafett22

    bobafett22 Member

    i tried it didn't work,.i was able to backup Angels&Demons just fine though:(do i need to update my 1click.it just seems wierd that i was abel to backup Angels&Demons just fine but i still cant backup a movie like Transformers2?:bang: here is the statuse report for "Up" Summary for drive J: (AnyDVD 6.6.0.8)
    MAD DOG MD-16XDVD9A2 1.F3 05020900
    Drive (Hardware) Region: 1

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 1977536 sectors (3862 MBytes)
    Total size: 3864640 sectors (7548 MBytes)

    Video DVD (or CD) label: UP
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1!

    Found & removed structural copy protection!
    Found & removed invalid cell pieces!
    Found & removed bogus title set(s)!
    Found & removed invalid VOBUs!
    RCE protection not found.
    UDF filesystem patched!
    Autorun not found on Video DVD.
    Found & removed 15 potential bad sector protections!
    Emulating RPC-2 drive with region 1!
     
    Last edited: Dec 19, 2009
  16. Clams

    Clams Well-Known Member

    The AnyDVD ripper output produces a DVD Compliant, unprotected, rip that one ought to be able to import into ANY DVD copy program. I still use DVDShrink which hasn't been updated in 1000 years and have no problems with anything.

    What you need to do now is to upload the AnyDVD logfile from a disk that you CANNOT rip with the AnyDVD ripper. The "read me" stuff at the top of the board here explains how to do that. Without a logfile it's impossible to try to diagnose your specific problem.

    -W
     
  17. James

    James Redfox Development Team Staff Member

    Maybe you should just do yourself a favor and buy CloneDVD2.
     
  18. RedFox 1

    RedFox 1 Super Moderator

    I think this thread would be better served in the Third Party Products Forum.
     
  19. shannon90210

    shannon90210 Well-Known Member



    Were you able to rip "UP" to your HDD using the AnyDVD"Ripper" ?
    Are you able to create an AnyDVD Log file ?

    What Version# of 1Click are you presently using ?




    Your MAD DOG MD-16XDVD9A2 - has seen better days
    The last Firmware Update was Oct 2006
    http://www.cdrinfo.com/Sections/Firmware/SingleModel.aspx?DriveId=1393
    That drive is going on 5 years old


    :)