6123 wanring

Discussion in 'AnyDVD HD (DVD issues)' started by GreenHead, Feb 18, 2007.

  1. GreenHead

    GreenHead Active Member

    I upgraded fron 6114 to the newest version today. When I did I get a error saying that
    AnyDVD 6123
    Wanring!
    No DVD Drive Detected!
    Possible Reasons
    1. You don't have a DVD drive ,buy one.
    2. You haven't rebooted your system after ANYDVD has been installed. Please reboot.
    3.Your external dvd drive is not powered on or is not properly connected.
    4. There is a problem initialisingthe ANYDVD driver.if this is the case, try this Unistall AnyDVD, reboot, install AnyDVD, Reboot.
    It will not let me uninstall ANYDVD. It says it is running. Thats from the add/remove programs and the slysoft anydvd uninstall. this error comes up when i boots up. Everything worked great until i updated. So nothing has changed.
     
  2. DetroitBaseball

    DetroitBaseball Well-Known Member

    Maybe you should uninstall and reinstall. Save your key.
     
  3. GreenHead

    GreenHead Active Member

    I can not uninstall.
    I get an error saying can not uninstall anydvddialog.dll. says it maybe running but it is not. When i go to task manager its there but i end process and it does nothing.
     
  4. DetroitBaseball

    DetroitBaseball Well-Known Member

    Disable AnyDVD from starting on boot and reboot and try again to uninstall.
     
  5. linx05

    linx05 Well-Known Member

    Make sure when you install it, reboot your computer.
     
  6. GreenHead

    GreenHead Active Member

    I get the exact same warning everytime. I have unistalled then reboot then install then reboot. As soon as I install the error comes up. When I try to unistall I get a 2 errors that I have to ignore just to get it to uninstall. Is there a way to get back to 61114 so I can get back to backing up movies.
     
  7. GreenHead

    GreenHead Active Member

    I got it to uninstall with out the errors rebooted and all that and still get the warning massage. how do you post a pic of your desktop and I can show you the warning massage. It in doc form and when I try to upload it says it to big . Limit is 19.5 and mine is 40.5 any way to make is smaller?
     
    Last edited: Feb 18, 2007
  8. oldjoe

    oldjoe Well-Known Member

    FastStone Capture is free screen capture tool that you can use to copy the whole page or any part therein. Use an online host, Image Shack is a good one, to post as a Thumbnail.
    Older versions of ANYDVD

    Use EndItAll and then uninstall AnyDVD.
     
    Last edited: Feb 18, 2007
  9. GreenHead

    GreenHead Active Member

    Here is the Warning error.
    [​IMG]
     
  10. oldjoe

    oldjoe Well-Known Member

    Right clik "My Computer"....Select-Properties...Hardware...Device manager...Find your DVDRW under DVD/CD-ROM drives...Double clik on the drive...Select Driver....Uninstall...OK...Reboot.
     
  11. GreenHead

    GreenHead Active Member

    I rolled back to 6114 and still got the error. I removed both drivers, rebooted didnt get the error on start up but now I get a Norton system Frame work error when anydvd starts up now. Thanks for your help with this and the links
     
  12. oldjoe

    oldjoe Well-Known Member

    Does AnyDVD work now? My best advice about Norton is to Remove it completely and get AVG Free. Norton is overpriced, a system hog and known to cause more problems that any other software in the world.
     
  13. Webslinger

    Webslinger Retired Moderator

    This use to be the default screen used when Anydvd thought a crack was involved. Whether that's still the case, I'm not sure.

    Based on your Norton issues, I suggest there are other problems on your system that are causing a corrupt installation of Anydvd.
     
  14. TPLAT

    TPLAT Well-Known Member

    If I remember correctly I got the same warning after I updated to the latest version of AnyDvd, I just ignored it and restarted my pc a few minutes later and it has been working fine since.
     
  15. Charlie

    Charlie Well-Known Member

    I only got this message once and after a reboot it was all fine no warnings then.
     
  16. GreenHead

    GreenHead Active Member

    I dont have a crack version I paid for all my Sly Products. I got this message when I tried to install the newest version over my 6114. I reverted back to 61114 and still got it. I removed my drives from the device manager let windows find them and now I dont get the message on start up. I get a norton framework message if I use the autostart setting. If I dont use it I dont get a message. I am back to 6114 for now.

    Thanks again old joe.
     
  17. Webslinger

    Webslinger Retired Moderator

    I wasn't suggesting this. I was just mentioning what James stated a long time ago about that screen. It's possible to get it for other reasons too, obviously.

    Out of curiosity, what does the full message say, and what OS are you running?
     
  18. seminolet100

    seminolet100 New Member

    I had the same error show up after the update but once i did a reboot it was ok.
     
  19. GreenHead

    GreenHead Active Member

    I am running XP SP2 IE 7.
    My Norton is Internet Sec 7.
     
  20. Webslinger

    Webslinger Retired Moderator

    What does the full message say?