SamuriHL
UHD Guru
- Joined
- Jan 28, 2007
- Messages
- 15,029
- Likes
- 2,527
@SamuriHL
This false pop-up message "bus encryption failure" appears only for unsupported disks. Yes correct, the disc cannot be decrypted via the bus.
Better here now would be the pop-up message "Disc is not supported".
The pop-up message "bus encryption failure" should only be displayed if there really is a problem with the BUS. But this is not the case here.
BUS and drive are "friendly".
About the AnyDVD scanner:
If a disc is also not yet supported, then the drive scans for a very long time. The drive "saws" and makes strong noises.
But if a disc is supported, the drive scans only very briefly (a few seconds) and without any sawing noise.
I think the text in the pop-up message should be changed if a disc cannot be decrypted yet.
The AnyDVD scanner should not torture the drive if the disc cannot yet be decrypted.
No, this is not correct. At all. AnyDVD is having issues with unsupported discs in your case, and the grinding you hear is likely a remnant of the sleep bug. In a normal situation you will not get a bus encryption failure AT ALL on a UHD Friendly drive. This is not indicative of the scanner process, this is indicative of an AnyDVD problem which is outside the scope of the scanner. Bus encryption failure errors are valid for other drives and need to be reported as a problem because people often try to scan with official UHD drives that are NOT supported by AnyDVD.
@SamuriHL
Still as a supplement:
If a disk is not yet supported, then the disk is often not displayed in the drive = "Empty_Drive". You can not make a scan and you can not make an encrypted backup.
The drive "saws" and scans for a very long time. Also an encrypted backup or a log with AnyDVD Scanner 1.0.1.1 can not be made.
Sometimes it also helps to open and close the disk several times.
The phenomenon always occurs only with unsupported discs.
But as soon as the disc is supported, the same disc appears in the drive in a few seconds.
Again, this is a problem with AnyDVD not the scanner.