• AnyStream is having some DRM issues currently, Netflix is not available in HD for the time being.
    Situations like this will always happen with AnyStream: streaming providers are continuously improving their countermeasures while we try to catch up, it's an ongoing cat-and-mouse game. Please be patient and don't flood our support or forum with requests, we are working on it 24/7 to get it resolved. Thank you.

Issue with "Roots: 30th Anniversary Edition" Disc two, side two

D

dailyvault

Member
Thread Starter
Joined
Feb 28, 2009
Messages
5
Likes
0
Obtained this from my local library, and was able to rip .ISO files of the other discs in the set with no issues. However, the second side of disc two prompts AnyDVD to scan the disc for upwards of three minutes. When it does complete scanning, it only recognizes about twelve seconds of data on the disc, when there should be upwards of two hours' worth.

Had this problem with AnyDVD 8.2.9.1 and 8.2.9.2, and tried a second version of this set from a different library, with the same results.

UPC is: 0 85391 14485 4; LOG file is also attached.

Any assistance would be greatly appreciated... though I understand since this is an older title, priority will be given to newer releases.
 

Attachments

  • AnyDVD_8.2.9.2_Info_E_ROOTS_DISC2_SIDE_B.ziplog
    128 KB · Views: 2
HL-DT-ST DVDRAM GUE0N T.02
Drive (Hardware) Region: 0 (not set!)

Start by setting your drive hardware region and try again

Verstuurd vanaf mijn Nexus 6P met Tapatalk
 
dailyvault said:
Obtained this from my local library, and was able to rip .ISO files of the other discs in the set with no issues. However, the second side of disc two prompts AnyDVD to scan the disc for upwards of three minutes. When it does complete scanning, it only recognizes about twelve seconds of data on the disc, when there should be upwards of two hours' worth.

Had this problem with AnyDVD 8.2.9.1 and 8.2.9.2, and tried a second version of this set from a different library, with the same results.

UPC is: 0 85391 14485 4; LOG file is also attached.

Any assistance would be greatly appreciated... though I understand since this is an older title, priority will be given to newer releases.
Click to expand...
Your disc and / or drive is dirty and / or defective. Sorry.
 
Thank you, Ch3vr0n and James... setting the region on the burner did not work, and I wouldn't be surprised if the disc was simply not properly readable, as it's trying to read what would normally be the label side of a library disc.

I have an external burner I can also try (once I find it, that is), to see if it is the internal drive that is the issue.

I sincerely appreciate the quick response from both of you. Thank you again.
 
You must log in or register to reply here.
Back
Top