First, be polite. I know I should post a log, but there is not a sticky on how to do it when program crashes (or hangs).
My problem comes with CloneBD v1.0.8.4 with "Formula One 2013 Review" BD that had been ripped to iso and put on hard drive with plenty of room. The iso is 44.7Gb and I want to shrink it to 25GB for single layer. I did 'complete copy' with 'use original audio' and another time with 'convert all audio'. I just lowered the bitrate. The conversion starts fine for about 30 seconds and clonebd hangs and I have to close it.
I put show debug window and with v1.0.8.4 I got a lot of the following right around that spot in the preview video:
v1.0.8.4
I installed v1.0.8.0 and ran same procedure and got this during same point in video:
v1.0.8.0
BUT it continued to process ISO BD way past that point in video.
I ultimitaly used BDRebuilder with success so it is not a problem, but just wanted to point out an issue of mine.
OK, I was hesitant to post this, any help would be appreciated. Negativity would not be appreciated.
My problem comes with CloneBD v1.0.8.4 with "Formula One 2013 Review" BD that had been ripped to iso and put on hard drive with plenty of room. The iso is 44.7Gb and I want to shrink it to 25GB for single layer. I did 'complete copy' with 'use original audio' and another time with 'convert all audio'. I just lowered the bitrate. The conversion starts fine for about 30 seconds and clonebd hangs and I have to close it.
I put show debug window and with v1.0.8.4 I got a lot of the following right around that spot in the preview video:
v1.0.8.4
00:00:34.345 | [Debug] Transcoder [Chameleon-5] MEMORY_SHARE::Allocate:318 > MEMORY_SHARE(PAYLOAD(A:1100)): NO MORE MEMORY (HOLD) -- size=8388608, count=4255(4259), entry-size=8034480/354128 (8043373)
00:00:34.345 | [Debug] Transcoder [Chameleon-5] MEMORY_SHARE::Allocate:323 > MEMORY_SHARE(PAYLOAD(A:1100)): NO MORE MEMORY (RELEASE)
00:00:34.345 | [Debug] Transcoder [Chameleon-5] MEMORY_SHARE::Allocate:318 > MEMORY_SHARE(PAYLOAD(A:1100)): NO MORE MEMORY (HOLD) -- size=8388608, count=4255(4259), entry-size=8034480/354128 (8043373)
00:00:34.346 | [Debug] Transcoder [Chameleon-5] MEMORY_SHARE::Allocate:323 > MEMORY_SHARE(PAYLOAD(A:1100)): NO MORE MEMORY (RELEASE)
.
.
.
00:00:34.804 | [Debug] Transcoder [Chameleon-5] MEMORY_SHARE::Allocate:318 > MEMORY_SHARE(PAYLOAD(A:1100)): NO MORE MEMORY (HOLD) -- size=8388608, count=4266(4267), entry-size=8051115/337493 (8058018)
00:00:34.850 | [Debug] Transcoder [Chameleon-5] MEMORY_SHARE::Allocate:318 > MEMORY_SHARE(PAYLOAD(A:1100)): NO MORE MEMORY (HOLD) -- size=8388608, count=4265(4267), entry-size=8050937/337671 (8058018)
00:00:34.850 | [Debug] Transcoder [Chameleon-5] MEMORY_SHARE::Allocate:318 > MEMORY_SHARE(PAYLOAD(A:1100)): NO MORE MEMORY (HOLD) -- size=8388608, count=4265(4267), entry-size=8050937/337671 (8058018)
00:00:44.346 | [Debug] Transcoder [Chameleon-5] TASK::Insert:348 > Chameleon(00000000) :: Task insertion stalled for pid:1100 - Audio Encoder ([counter:5052], 5052..5060, max 8)
00:00:44.357 | [Debug] Transcoder [Chameleon-5] TASK::Insert:348 > Chameleon(00000000) :: Task insertion stalled for pid:1100 - Audio Converter ([counter:5061], 5061..5069, max 8)
00:00:34.345 | [Debug] Transcoder [Chameleon-5] MEMORY_SHARE::Allocate:323 > MEMORY_SHARE(PAYLOAD(A:1100)): NO MORE MEMORY (RELEASE)
00:00:34.345 | [Debug] Transcoder [Chameleon-5] MEMORY_SHARE::Allocate:318 > MEMORY_SHARE(PAYLOAD(A:1100)): NO MORE MEMORY (HOLD) -- size=8388608, count=4255(4259), entry-size=8034480/354128 (8043373)
00:00:34.346 | [Debug] Transcoder [Chameleon-5] MEMORY_SHARE::Allocate:323 > MEMORY_SHARE(PAYLOAD(A:1100)): NO MORE MEMORY (RELEASE)
.
.
.
00:00:34.804 | [Debug] Transcoder [Chameleon-5] MEMORY_SHARE::Allocate:318 > MEMORY_SHARE(PAYLOAD(A:1100)): NO MORE MEMORY (HOLD) -- size=8388608, count=4266(4267), entry-size=8051115/337493 (8058018)
00:00:34.850 | [Debug] Transcoder [Chameleon-5] MEMORY_SHARE::Allocate:318 > MEMORY_SHARE(PAYLOAD(A:1100)): NO MORE MEMORY (HOLD) -- size=8388608, count=4265(4267), entry-size=8050937/337671 (8058018)
00:00:34.850 | [Debug] Transcoder [Chameleon-5] MEMORY_SHARE::Allocate:318 > MEMORY_SHARE(PAYLOAD(A:1100)): NO MORE MEMORY (HOLD) -- size=8388608, count=4265(4267), entry-size=8050937/337671 (8058018)
00:00:44.346 | [Debug] Transcoder [Chameleon-5] TASK::Insert:348 > Chameleon(00000000) :: Task insertion stalled for pid:1100 - Audio Encoder ([counter:5052], 5052..5060, max 8)
00:00:44.357 | [Debug] Transcoder [Chameleon-5] TASK::Insert:348 > Chameleon(00000000) :: Task insertion stalled for pid:1100 - Audio Converter ([counter:5061], 5061..5069, max 8)
I installed v1.0.8.0 and ran same procedure and got this during same point in video:
v1.0.8.0
00:00:36.678 | [Debug] Transcoder [Chameleon-5] CODEC_FFMPEG:ecodeAudio:915 > CAUTION: received error 0xC14D4E49 from audio decoder, restarting
00:00:36.933 | [Hint] Transcoder [Chameleon-4] IChameleonFrontEnd::GetString Encoder [1100]/channels -> 2
00:00:36.933 | [Hint] Transcoder [Chameleon-4] IChameleonFrontEnd::GetString Encoder [1100]/channels -> 2
BUT it continued to process ISO BD way past that point in video.
I ultimitaly used BDRebuilder with success so it is not a problem, but just wanted to point out an issue of mine.
OK, I was hesitant to post this, any help would be appreciated. Negativity would not be appreciated.