DVD Mobile Locking up/Stalling at 98%

[dlp1950]

I am using AnyDVD 2.5.5.0 and CloneDVD Mobile 1.9.0.7, in two different DVD Read/Write drives. One is a Sony External DRU-830A and the other is a TSSTcorp internal TS-H653Q. I have additionally tried 1.9.0.6 witht he same result. While converting to Apple TV AVC or iPad AVC, the disc read to 98% before locking up and stalling. It will not CANCEL so that I can get a transcoder log file, or I would send it. I can get Mobile 1.2.0.1 to work, but the sync is slightly off and the vidoe doesn't look very good on Apple TV or my iPad.

What do I need to do next? I can convert it via chapters, and it work just fine on chapters 1 thru 21 and locks on 22. Amazing enough 1-21 are the complete move, with credits etc. The DVD is "God's Not Dead" and a second copy of the DVD provided the same result, so what is the next step besides giving up?

 

[dlp1950]

I Know how to fix it now, thanks to kurt

I followed this advice from kurt and it worked fine. my cpu was running at 25%, using Clone DVD Mobile 1.9.0.7 and AnyDVD 7.5.5.0, I was able to get a precision M4V file backup so that I could watch it on my Apple TV and my iPad, and I missed this post for almost a year. Great job all, I have been using these products for over nine years, and have found them to be terrific and well supported. Thanks again to the whole team, and a special thanks to kurt for this great tip.

here's what he said in an earlier thread:

When your system is hung at 99%, hit CTR-ALT-DEL, go to Processes tab, mencoder.exe will be running at about 13% cpu (depending on your rig). Select it and hit end process. This closes the MP4 file!!! All is well with the final file!8)

 

[dmreese1]

99% Freeze with CloneDVDMobile

I am having the same problems and have tried all suggestions and nothing works. I am trying Handbrake right now and it seems to be working.

Sad, Slysoft stuff used to work pretty well but have had too many problems lately.

 

[rzpnw46]

Thanks, kurt.

I didn't find a mencoder.exe process but I did find Dispatcher for LibAV transcoding (32 bit) at around 16 to 18% with a little picture of a sheep next to it. I ended this process and worked like a charm.

 

[joatnm]

This is Chameleon transcoder engine [2.0.1.5] (09/23/2013)

LOG: [NEW SEGMENT] VOB:1 CELL:1
LOG: Video Start PTS = 186537082
LOG: AudioA Start PTS = 186508137
LOG: FrameCount = -9.
FFmpeg version from svn, Copyright (c) 2000-2008 Fabrice Bellard, et al.

NOTICE: This app contains changes made by SlySoft Inc. in compliance with GPL.
All changes are available as patches from http://oss.slysoft.com

This file was digitally signed by SlySoft Inc.

FFmpeg maintainers receive SlySoft products free of charge. If you're
interested then please contact us at support@slysoft.com

Input #0, cham, from 'pipe:':
Duration: N/A, start: 0.000000, bitrate: 10184 kb/s
Stream #0.0: Video: mpeg2video, yuv420p, 720x480 [PAR 32:27 DAR 16:9], 9800 kb/s, 59.94 tbr, 90k tbn, 59.94 tbc
Stream #0.1: Audio: ac3, 48000 Hz, 5.1, s16, 384 kb/s
Stream #0.2: Subtitle: dvdsub
[NULL @ 01029430]Unknown option 'vb'
[swscaler @ 02750050]Unknown option 'vb'
[libx264 @ 02a4ea70]using SAR=1/1
[libx264 @ 02a4ea70]frame MB size (80x45) > level limit (1620)
[libx264 @ 02a4ea70]DPB size (3 frames, 4147200 bytes) > level limit (2 frames, 3110400 bytes)
[libx264 @ 02a4ea70]MB rate (107892) > level limit (40500)
[libx264 @ 02a4ea70]using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2
[libx264 @ 02a4ea70]profile Baseline, level 3.0
Output #0, ipod, to 'C:\Users\user name\Documents\Bxxxxxxxxxx.m4v':
Stream #0.0: Video: libx264, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], q=2-31, 4860 kb/s, 30k tbn, 29.97 tbc
Stream #0.1: Audio: libfaac, 48000 Hz, 2 channels, s16, 160 kb/s
Stream mapping:
Stream #0.0 -> #0.0
Stream #0.1 -> #0.1
*** BONG! 4 frames dup, vdelta = 4.000010 (method=-1), [0, 0, 133467, 166833]
LOG: SendPacket:#195 // V:210, A:111, S:0 // __ensure( WriteFile(PipeWrite, Frame.Data, Frame.Length, &Have, NULL) && Have == Frame.Length )