Im getting a problem trying to rip.
I get a Vob error on the first Vob.
I have returned the disk and received a new copy but it does the same in the same place.
I saw that you need to put on AI Scanner to enabled but there is no change to the result.
Have attached the Ziplog as requested.
Thanks
Bob
IF this is not a disc protection, then I would be inclined to say that you either have a bad/defective disc, or your drive is unable to read from the disc. I would try to clean the disc, and/or return/exchange for another. Or try another machine if you have one. BUT this is what I see in your log file.
37.13s: Added cell Title, VTS 17, PGC 2, LU 1, Cell 5
State steps: 1
Highest steps: 155
Highest total steps: 4905
Highest Button depth: 8
Total count: 155
Total cell count: 57
46.19s: read sectors failed, sense 3:11:5
46.19s: tries 2 retry 475787 to 475788
54.85s: read sectors failed, sense 3:11:5
54.85s: tries 1 retry 475787 to 475788
63.52s: read sectors failed, sense 3:11:5
63.52s: tries 0 retry 475787 to 475788
63.52s: read error 475787 to 475788, max 3605312, io->read_error 0
63.52s: Reading sector 475787 failed, final 3605312
63.52s: Added cell Title, VTS 17, PGC 2, LU 1, Cell 6
State steps: 1
Highest steps: 175
Highest total steps: 5080
Highest Button depth: 8
Total count: 175
Total cell count: 58
72.39s: read sectors failed, sense 3:11:5
72.39s: tries 2 retry 474478 to 474479
81.14s: read sectors failed, sense 3:11:5
81.14s: tries 1 retry 474478 to 474479
89.90s: read sectors failed, sense 3:11:5
89.90s: tries 0 retry 474478 to 474479
89.90s: read error 474478 to 474479, max 3605312, io->read_error 0