Please do no post in other people's troubleshooting threads unless you wish to help them. click
http://forum.slysoft.com/showpost.php?p=87585&postcount=4 and read fully please. Thank you
from
Frequently Asked Questions (Read Before You Post)
12. My backups play on my computer or standalone dvd player, but not in something else. Why?
First, if the backup is playing in a standalone dvd player or on your computer, that means Anydvd and whatever backup program you used worked.
The most common reason why you're having this problem (if the backup doesn't work in a standalone dvd player) is due to a compatibility issue between the blank media you're using and whatever you're using to play the backup in (standalone dvd player, for example). Basically your dvd player, dvd-rom drive, etc. doesn't like the blank media you're using (or if you're using +R media, you didn't change the booktype to "dvd-rom"). You can try choosing other blank media (+r instead of -r, for example, and change the booktype to "dvd-rom")--or buy a different standalone dvd player (or a different dvd-rom drive, burner, etc.).
If you're using dvd-r media and your standalone dvd player gives you a message similar to ""Play Prohibited, please check disc", use dvd+r media instead and change the booktype to "dvd-rom" (see "b)" below).
a) Are you using junk blank media? If you're not using Taiyo Yuden (not Valueline), Verbatim, Maxell Plus, or Maxell Broadcast Quality, then chances are the answer to this question is "yes". If you use +R DL blank media use Verbatim +R DL (made in Singapore) or MAM-A 8x +R DL only
b) Click
this and read FULLY (especially take a look at point 4 for more information on bitsetting/booktyping, but all points are very important)
The same factors also apply to why the backup doesn't play in your computer (but there can be other factors including buggy or poorly installed dvd player software, bad drivers, etc.).
It's also possible the playback device/player you're using is slowly dying.
--
1. Use Anydvd 6.3.1.7: click
http://forum.slysoft.com/showpost.php?p=93915&postcount=1
You may need to reboot after installing if prompted to do so.
2. Click the red fox icon on your toolbar. Click "default". Click "ok".
3. If you use DVDShrink, Nero Recode, or programs that generally can't handle structural protections, right-click on the fox icon on your toolbar and select "Rip video-dvd to Hard Disk". Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish. You can then import that rip into whatever program you want. This is an important step if the original disc contains structural protection.
You don't need to do this if you own Clonedvd or are planning to make a backup with Clonecd.
