• AnyStream is having some DRM issues currently, Netflix is not available in HD for the time being.
    Situations like this will always happen with AnyStream: streaming providers are continuously improving their countermeasures while we try to catch up, it's an ongoing cat-and-mouse game. Please be patient and don't flood our support or forum with requests, we are working on it 24/7 to get it resolved. Thank you.

problems with copying the movie WAR

iriedawta

New Member
Thread Starter
Joined
Feb 15, 2008
Messages
1
Likes
0
ok..i don't know whats wrong, but i cannot copy the movie WAR by jet li. I tried different dvds; fujifilm and verbatim. All comes out with skipping in movie and audio. I checked my original dvd and it runs smoothly on computer and in dvd player. CAn't say the same thing for the burnt copy. it skips from the start and there is no ending in it through out the movie. is anybody else having problems like i have?
 

Junk

and verbatim

Better

Try Taiyo Yuden (not Valueline)
One source is www.supermediastore.com

1. Update your burner's firmware (if available)
http://forum.slysoft.com/showpost.php?p=12794&postcount=10

2. Use good quality media (Memorex, Ritek, Princo, Fuji, TDK from Costco, and Maxell that are not made in Japan are not good quality media). Are you using inferior blank media? If you're not using Taiyo Yuden (not Valueline), Verbatim, Maxell Plus, or Maxell Broadcast Quality, then chances are the answer is yes.
If you use poor quality blank media, then you should expect problems.

visit http://www.redflagdeals.com/forums/showpost.php?p=4764653&postcount=25
and
http://www.redflagdeals.com/forums/showthread.php?p=3976250


3. Try lowering your burn speed a little (if you have a 16x burner and 16x rated media try writing to it at 12x or 8x instead of 16x)

4. If you're using +R, +RW, or +R DL media, change the booktype to "dvd-rom"
http://forum.slysoft.com/showthread.php?t=476 (step 3)

5. Avoid sticker labels (they tend to cause problems)

6. Try setting a custom size of 4300 in whatever burning program you're using (but if you're using good media, you shouldn't have to) if you're using regular single layer dvd-5 (4.7GB) discs.

7. Download Nero cd-dvd speed. It's a free program. Select the tab labeled "scandisc". Insert the problematic backup disc, select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your backup is bad (which is the most likely case), your optical drive may be slowly dying, or your optical drive simply doesn't like the disc (or your choice of blank media)--even if the disc looks fine.

Bad burn quality is notorious around the end of discs (see step 6)
and also at layer breaks when using low quality DL media (use Verbatim +R DL media made in Singapore or MAM-A 8x +R DL, and change the booktype to "dvd-rom")
 
1. Use Anydvd 6.3.1.5: click http://static.slysoft.com/SetupAnyDVD.exe

You may need to reboot after installing if prompted to do so.

2. Click the red fox icon on your toolbar. Click "default". Click "ok".

3. If you use something other than Clonedvd, right click the red fox icon on your toolbar-->select "rip video-dvd to haddisk". Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish. You can then import that rip into whatever program you want.

4. Use the latest Clonedvd: click
http://static.slysoft.com/SetupCloneDVD.exe

5. Follow the steps from this link in order: click http://forum.slysoft.com/showthread.php?t=476 (follow them step by step)

6. If you still have problems, then . . .

A. Upload the .zip to the fourms:

a) Ensure Anydvd is running.
b) Put the problematic original disc in your optical drive/reader. Wait for Anydvd to scan the disc.
c) Right click the red fox icon on your toolbar.
d) Select "Create Logfile"
e) Wait for Anydvd to create a log file.
f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
g) Go to your My Documents folder
h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
i) When replying or posting in the Slysoft forums, look for the icon that looks like
attach.gif

j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
l) Click the "Browse" button, and locate and select the .zip file you created.
m) click "upload"


B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?

C) click http://forum.slysoft.com/showthread.php?t=5091 to see if your question has already been answered

D) What blank media are you using? Specify a) brand name b)type (-R, +R, -RW, +RW, RAM, DL, etc.) c)media code, d) capacity/size, e) batch codes/serial codes (often found printed on the inner plastic hub of the blank disc), and f)country (factory information would be great as well, if possible) where the media was made (look on the physical packaging; do not rely on programs to accurately give you this information).

If you don't know how to obtain media codes, you may find the following programs useful:

http://dvd.identifier.cdfreaks.com and http://www.dvdinfopro.com/

E) At what speed are you burning your blank media?
 
Back
Top