Greetings,
On all three of these discs I am utilizing Anydvd with 1 Click Pro. I had no problems burning and copying Good Luck Chuck or 3:10 to Yuma but Mr. Woodcock would not copy. The other 2 are relative because for each one with 1 click pro I am getting the following message:
"The process AnyDVD was detected with the copy protection based on unreadable sectors setting enabled. This setting is not compatible with the concurrent use of 1 Click Pro's CPRx setting. We recommend you disable CPRx if you wish to use AnyDvd for bad sector error correction. click the OK button to disable CPRx setting for this dvd."
My code is as follows: SONY DVD RW DRU-840A SS01 JUL12 ,2007
Drive (Hardware) Region: 0 (not set!)
Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 2 (opposite)
Size of first Layer: 2073408 sectors (4049 MBytes)
Total size: 4130072 sectors (8066 MBytes)
Video DVD (or CD) label: MR_WOODCOCK
Media is CSS protected!
Video Standard: NTSC
Media is locked to region(s): 1!
RCE protection not found.
Found & removed structural copy protection!
Found & removed invalid cell pieces!
Found & removed bogus title set(s)!
Found & removed invalid VOBUs!
UDF filesystem patched!
Found & removed Autorun from Video DVD!
Found & removed 17 potential bad sector protections!
Emulating RPC-2 drive with region 1!
I am clicking OK on this and it is still not burning. I am using AnyDVD version 6.3.09 and 1 CLick Pro version 3.1.2.4 , Any suggestions. Also what should my AI Scanner be set to? Thanks.
On all three of these discs I am utilizing Anydvd with 1 Click Pro. I had no problems burning and copying Good Luck Chuck or 3:10 to Yuma but Mr. Woodcock would not copy. The other 2 are relative because for each one with 1 click pro I am getting the following message:
"The process AnyDVD was detected with the copy protection based on unreadable sectors setting enabled. This setting is not compatible with the concurrent use of 1 Click Pro's CPRx setting. We recommend you disable CPRx if you wish to use AnyDvd for bad sector error correction. click the OK button to disable CPRx setting for this dvd."
My code is as follows: SONY DVD RW DRU-840A SS01 JUL12 ,2007
Drive (Hardware) Region: 0 (not set!)
Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 2 (opposite)
Size of first Layer: 2073408 sectors (4049 MBytes)
Total size: 4130072 sectors (8066 MBytes)
Video DVD (or CD) label: MR_WOODCOCK
Media is CSS protected!
Video Standard: NTSC
Media is locked to region(s): 1!
RCE protection not found.
Found & removed structural copy protection!
Found & removed invalid cell pieces!
Found & removed bogus title set(s)!
Found & removed invalid VOBUs!
UDF filesystem patched!
Found & removed Autorun from Video DVD!
Found & removed 17 potential bad sector protections!
Emulating RPC-2 drive with region 1!
I am clicking OK on this and it is still not burning. I am using AnyDVD version 6.3.09 and 1 CLick Pro version 3.1.2.4 , Any suggestions. Also what should my AI Scanner be set to? Thanks.
Last edited: