i downloaded the beta version for AnyDVD and was able to rip it with AnyDVDripper and burn with dvdshrink and everything was fine until 15 minutes into the movie....and then it starts to skip for the rest of the movie.
This is a poor quality burn issue. The Shrink backup works fine, provided you're using Anydvd 6.3.0.9. Since you're not using Clonedvd, you posted in the wrong forum. Moving thread . . .
1. Update your burner's firmware (if available)
http://forum.slysoft.com/showpost.php?p=12794&postcount=10
2. Use good quality media (Memorex, Ritek, Princo, Fuji, TDK from Costco, and Maxell that are
not made in Japan are not good quality media).
Are you using inferior blank media? If you're not using Taiyo Yuden (not valueline), Verbatim, or Maxell Broadcast Quality, then chances are the answer is yes.
If you use poor quality blank media, then you should expect problems.
visit
http://www.redflagdeals.com/forums/showpost.php?p=4764653&postcount=25
and
http://www.redflagdeals.com/forums/showthread.php?p=3976250
For +R DL blank media, use Verbatim made in Singapore or MAM-A 8x +R DL.
3. Try lowering your burn speed (not below 4x; if you have a 16x burner and 16x rated media try writing to it at 12x instead of 16x; an 8x burn speed on 16x rated media wouldn't be a bad idea either)
4. If you're using +R, +RW, or +R DL media, change the booktype to "dvd-rom"
http://forum.slysoft.com/showthread.php?t=476 (step 3)
5. Avoid sticker labels (they tend to cause problems)
6. Download
Nero cd-dvd speed. It's a free program. Select the tab labeled "scandisc". Insert the problematic backup disc, select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your backup is bad (which is the most likely case), your optical drive may be slowly dying, or your optical drive simply doesn't like the disc (or your choice of blank media)--even if the disc looks fine.
Bad burn quality is notorious around the end of discs (see step 6)
and also at layer breaks when using low quality DL media (use Verbatim +R DL media made in Singapore or MAM-A 8x +R DL, and change the booktype to "dvd-rom")