• AnyStream is having some DRM issues currently, Netflix is not available in HD for the time being.
    Situations like this will always happen with AnyStream: streaming providers are continuously improving their countermeasures while we try to catch up, it's an ongoing cat-and-mouse game. Please be patient and don't flood our support or forum with requests, we are working on it 24/7 to get it resolved. Thank you.

OH NO! cant burn ghost whisperer season 2!! help!

fishinmyhead

Member
Thread Starter
Joined
Nov 30, 2007
Messages
6
Likes
0
ok.. i think iv wasted liek 10 dvd-rs trying to burn this series.. i have the latest anydvd, and clonedvd and just cant make backups of ghost whisperer season 2.. i dont know whats going on. it gets to about 34% and then i get that.. "oh no!" i have also tried using dvd fab= failed and dvd cloner= also failed.. please please help!!
 
1) a)Click the red fox icon on your toolbar.
b) Navigate to "Program Settings".
c) Click "enable logging".
d) Click "ok".
e) Put the problematic disc in your optical drive/reader.
f) Go to your My Documents folder
g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
h) When replying or posting in the Slysoft forums, look for the icon that looks like
attach.gif

i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
k) click the "Browse" button, and locate and select the .zip file you created.
l) click "upload"

2) State the full a)error message(s) you encountered, b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?
 
still cant burn ghost wisperer s 2

i have udated my anydvd to the newest one, and i copied 4 discs. but 5 and 6 gve me error messages when te disc is "wrighting" not even any % this time. what can i do??
 

Attachments

  • AnyDVD_Info_D_GHOST_WHISPERER_SEASON_2_D6.zip
    90.9 KB · Views: 6
i have udated my anydvd to the newest one, and i copied 4 discs. but 5 and 6 gve me error messages when te disc is "wrighting" not even any % this time. what can i do??

State the full a)error message(s) you encountered
 
?

is there any way i can find out what the error message was without wasting a disc???
 
is there any way i can find out what the error message was without wasting a disc???

You claim you get to 34%. Is that during reading--or writing?

If it's during reading, I need the full error message (click "details"). You can output dvd files instead of your burner on Clonedvd's output screen.

1. Update to Anydvd 6.3.0.1: click http://forum.slysoft.com/showthread.php?t=10591

2. Update your burner's firmware (if available)
http://forum.slysoft.com/showpost.php?p=12794&postcount=10

3. Use good quality media (Memorex, Ritek, Princo, Fuji, TDK from Costco, and Maxell that are not made in Japan are not good quality media). Are you using inferior blank media? If you're not using Taiyo Yuden Premium, Verbatim, Maxell Plus, or Maxell Broadcast Quality, then chances are the answer is yes.
If you use poor quality blank media, then you should expect problems.

visit http://www.redflagdeals.com/forums/showpost.php?p=4764653&postcount=25
and
http://www.redflagdeals.com/forums/showthread.php?p=3976250

4. Try lowering your burn speed (not below 4x; if you have a 16x burner and 16x rated media try writing to it at 12x instead of 16x; an 8x burn speed on 16x rated media wouldn't be a bad idea either)

5. If you're using +R, +RW, or +R DL media, change the booktype to "dvd-rom"
http://forum.slysoft.com/showthread.php?t=476 (step 3)

6. Avoid sticker labels (they tend to cause problems)

7. Try setting a custom size of 4300 in Clonedvd (but if you're using good media, you shouldn't have to) if you're using regular single layer dvd-5 (4.7GB) discs.

8. Download Nero cd-dvd speed. It's a free program. Select the tab labeled "scandisc". Insert the problematic backup disc, select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your backup is bad (which is the most likely case), your optical drive may be slowly dying, or your optical drive simply doesn't like the disc (or your choice of blank media)--even if the disc looks fine.


Bad burn quality is notorious around the end of discs (see step 6)
and also at layer breaks when using low quality DL media (use Verbatim +R DL media made in Singapore, and change the booktype to "dvd-rom")




read http://forum.slysoft.com/showthread.php?t=476 fully please
 
error message

ok.. so i updated to the beta version and tried agean. i copied 4 of 6 discs with no problem, but disc 5 and 6 when it first starts wrightign before the little bars appear that say what percentage it is at, it gives me the error message..
media write error:
a write error has occurred, probably caused by bad media.
WriteDVD 10 11 W2

thanks for all of your help.
 
a write error has occurred, probably caused by bad media.
WriteDVD 10 11 W2

1. Update your burner's firmware (if available)
http://forum.slysoft.com/showpost.php?p=12794&postcount=10

2. Use good quality media (Memorex, Ritek, Princo, Fuji, TDK from Costco, and Maxell that are not made in Japan are not good quality media). Are you using inferior blank media? If you're not using Taiyo Yuden Premium, Verbatim, Maxell Plus, or Maxell Broadcast Quality, then chances are the answer is yes.
If you use poor quality blank media, then you should expect problems.

visit http://www.redflagdeals.com/forums/showpost.php?p=4764653&postcount=25
and
http://www.redflagdeals.com/forums/showthread.php?p=3976250

3. Try lowering your burn speed (not below 4x; if you have a 16x burner and 16x rated media try writing to it at 12x instead of 16x; an 8x burn speed on 16x rated media wouldn't be a bad idea either)

4. If you're using +R, +RW, or +R DL media, change the booktype to "dvd-rom"
http://forum.slysoft.com/showthread.php?t=476 (step 3)

5. Avoid sticker labels (they tend to cause problems)

6. Try setting a custom size of 4300 in Clonedvd (but if you're using good media, you shouldn't have to) if you're using regular single layer dvd-5 (4.7GB) discs.
 
i use only taiyo yuden dvd-rs with no special stickers or anythign on them just the regular silver ones. and the fastest my dvd burner burns is 8x. here is the info from anydvd about my drive with no disc in it.

No Disc is present in Drive F:!
AXV CD/DVD-ROM 2.2A
 
i use only taiyo yuden dvd-rs with no special stickers or anythign on them just the regular silver ones. and the fastest my dvd burner burns is 8x. here is the info from anydvd about my drive with no disc in it.

No Disc is present in Drive F:!
AXV CD/DVD-ROM 2.2A

That's not your burner. That's another drive.

I would try a different burner then. Perhaps it's dying.
 
is this the burner??
AXV CD/DVD-rom SCSI CdRom Device
SCDI DVD-rom SCSI CdRom Device
Sony DVD+RW DW-Q58A
thats what i found in the hardware section in windows explorer..
also, i dont know if this is helpfull at all but i just used clonecd with no problems today.. ?
thanks for the help.
 
Back
Top