• AnyStream is having some DRM issues currently, Netflix is not available in HD for the time being.
    Situations like this will always happen with AnyStream: streaming providers are continuously improving their countermeasures while we try to catch up, it's an ongoing cat-and-mouse game. Please be patient and don't flood our support or forum with requests, we are working on it 24/7 to get it resolved. Thank you.

Wants blank DVD, but there's one in the drive

dave0915

New Member
Thread Starter
Joined
Nov 19, 2007
Messages
2
Likes
0
New user. Copies OK (apparently) but does not recognize that there is a blank DVD in the drive to write to. Using AnyDVD and CloneDVD. Why do I need both, anyway? Did I mention that I'm on Vista? Apparently not. So, any other comments. I'm using Verbatim discs (even though the are Taiwan and I've updated and reloaded the DVD driver.
 
Last edited:
Using AnyDVD and CloneDVD. Why do I need both, anyway?

Slysoft software requires two programs. Basically, AnyDVD decrypts (removes encryptions) the disc and CloneDVD copies the disc.
 
Try this:
Go into your Device Manager, and find your drive. Right click on it, and choose "Uninstall". After it uninstalls, reboot, and let Windows detect new hardware, and install new a driver for you.
Good luck!
 
New user. Copies OK (apparently) but does not recognize that there is a blank DVD in the drive to write to.

1. Update your burner's firmware (if available)
http://forum.slysoft.com/showpost.php?p=12794&postcount=10

2. Use good quality media (Memorex, Ritek, Princo, Fuji, TDK from Costco, and Maxell that are not made in Japan are not good quality media). Are you using inferior blank media? If you're not using Taiyo Yuden Premium, Verbatim, Maxell Plus, or Maxell Broadcast Quality, then chances are the answer is yes.
If you use poor quality blank media, then you should expect problems.

visit http://www.redflagdeals.com/forums/showpost.php?p=4764653&postcount=25
and
http://www.redflagdeals.com/forums/showthread.php?p=3976250

3. Try lowering your burn speed (not below 4x; if you have a 16x burner and 16x rated media try writing to it at 12x instead of 16x; an 8x burn speed on 16x rated media wouldn't be a bad idea either)

4. read http://forum.slysoft.com/showthread.php?t=476 fully please
 
Back
Top