DQ
Well-Known Member
Thread Starter
- Joined
- Feb 28, 2016
- Messages
- 2,758
- Likes
- 2,674
Just posting this as a heads up but it APPEARS that CloneBD will not work at all with an AMD GPU and 22.3.1 drivers. Previously it worked fine but since I upgraded it fails immediately.
I already had decode acceleration turned off so this is just on the encode side that now it is failing.
I will test a bit more and post again. Maybe I am doing something silly, I will re-verify my process.
EDIT1- yes it is failing and I am doing just what I normally do.
This is Win11 if it makes a difference.
[00:10:03.229] - [ERROR ] [0x00000000006bff40] {AMD UVD/VCE-encoder}Encoder->SubmitInput() failed, 19
[00:10:03.229] - [ERROR ] [0x00000000006bff40] transcoder stop error: 0x80004005
[00:10:03.229] - [ERROR ] [0x00000000006bff40] last reported error: '{AMD UVD/VCE-encoder}Encoder->SubmitInput() failed, 19' (6)
[00:10:03.229] - Error in processStreams
I already had decode acceleration turned off so this is just on the encode side that now it is failing.
I will test a bit more and post again. Maybe I am doing something silly, I will re-verify my process.
EDIT1- yes it is failing and I am doing just what I normally do.
This is Win11 if it makes a difference.
[00:10:03.229] - [ERROR ] [0x00000000006bff40] {AMD UVD/VCE-encoder}Encoder->SubmitInput() failed, 19
[00:10:03.229] - [ERROR ] [0x00000000006bff40] transcoder stop error: 0x80004005
[00:10:03.229] - [ERROR ] [0x00000000006bff40] last reported error: '{AMD UVD/VCE-encoder}Encoder->SubmitInput() failed, 19' (6)
[00:10:03.229] - Error in processStreams
Last edited: