Moin,
ich habe seit heute diesen Brenner ASUS BW-16D1HT FW 3.01
Wenn ich nun eine ISO auf Disk brennen möchte, bricht nach kurzer Zeit der Brennvorgang ab!
Brennprogramm Nero 2014
Vielleicht weiß jemand einen Rat! Danke
Hier die Logdatei:
1040-01A5-534L-4374-A5XH-XAAA-****-****
X028-0083-29A5-AX8W-230U-91AM-****-****
Windows NT based 6.2
AMD64
Wow64Process
Nero Version: 15.0.25.0
Internal Version: 15,0,25,0
Recorder : <ASUS BW-16D1HT> FW version: 3.01 - HA 1 TA 0 - 15.0.25.0
Device bus : <> HA 1
Host system bus : <S-ATA>
Drive buffer : 4064kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD/DVD-ROM : <ASUS BW-16D1HT > FW version: 3.01 - HA 1 TA 0 - 15.0.25.0
Device bus : <> HA 1
Host system bus : <S-ATA>
=== Scsi-Device-Map ===
: ASUS BW-16D1HT 3.01 storahci Port 0 ID 0 DMA: Off
: Hitachi HCS5C3232SLA380 storahci Port 0 ID 0 DMA: Off
=== CDRom-Device-Map ===
ASUS BW-16D1HT E: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 29 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.9.2019
BD-Image brennen
20:56:24 #1 Text 0 File SCSIPTICommands.cpp, Line 617
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
20:56:24 #2 PHASE 214 File dlgbrnst.cpp, Line 2066
Generation of disc structures started
20:56:25 #3 PHASE 215 File dlgbrnst.cpp, Line 2066
Generation of disc structures completed
20:56:25 #4 Text 0 File Burncd.cpp, Line 3647
Turn on Disc-At-Once, using Blu-ray Disc media
20:56:25 #5 Text 0 File DlgWaitCD.cpp, Line 334
[E: BW-16D1HT ] Total disc capacity: 24438784 47732MB
User data to be written: 22770944 44474MB
Free space on disc: 24438784 47732MB
20:56:25 #6 Text 0 File DlgWaitCD.cpp, Line 346
[E: BW-16D1HT ] Write in overburning mode: NO (enabled: CD)
20:56:25 #7 Text 0 File DlgWaitCD.cpp, Line 3034
Recorder: ASUS BW-16D1HT, Media type: BD-R (seq)
20:56:25 #8 Text 0 File DlgWaitCD.cpp, Line 537
[E: BW-16D1HT ] >>> Protocol of DlgWaitCD activities: <<<
=========================================
20:56:25 #9 Text 0 File ThreadedTransferInterface.cpp, Line 879
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Modus 1)
2 indices, index0 (150) not provided
original disc pos #0 + 22770944 (22770944) = #22770944/5060:12.44
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 22770944 blocks [E: ASUS BW-16D1HT]
--------------------------------------------------------------
20:56:25 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1095
Prepare [E: ASUS BW-16D1HT] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 46634893312, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 22770944 | 22770944 | 0x00
22770944 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
MediaType: BD-R DL
20:56:25 #11 Text 0 File SCSIPTICommands.cpp, Line 404
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
20:56:25 #12 Text 0 File Burncd.cpp, Line 4517
Caching options: cache CDRom or Network-No, small files-No (<64KB)
20:56:25 #13 PHASE 36 File dlgbrnst.cpp, Line 2066
Burn process started at 4x (17.980 KB/s)
20:56:25 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2926
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
20:56:25 #15 Text 0 File Cdrdrv.cpp, Line 10814
---- Disc Structure (BD): Disc Information on BD (00h) ----
Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 4098
--- Header ---
Disc Information Identifier: <DI>
Disc Information Format: 01 h
Number of DI Units/Aux Frames in each DI block: 10
Number of (recording) layer to which this DI Unit applies: 0
DI unit Sequence Number in DI Block: 0
Continuation flag: Next DI Unit is the start of a new set of parameters (0)
Number of DI bytes in use in this DI unit: 98
--- Body ---
Disc Type Identifier: <BDR>
Disc Size/Class/Version: 1
DI Unit Format dependent contents:
BD Structure: 34 (22 h):
2 recording layer (DL), BD-R
Hybrid Disc identifier/Channel bit length: 1 (1 h):
no DVD layer present, no CD layer present
channel bit length of 74,5 nm (25.0 GB max. per layer)
Push-Pull polarity flag bits: 00 h
Recorded mark polarity flag bits: 00 h
BCA descriptor: BCA-code present (1)
Maximum transfer rate needed by the application: 0 Mbit/s
Data zone allocation:
First Physical ADIP Address of the Data Zone of the related layer (FAA): 00020000 h (131072)
Last Physical ADIP Address of the Data Zone of the related layer (LAA): 00194E7E h (1658494)
Recording velocities:
Nominal Recording Velocity: 4.92 m/s (1EC h)
Maximum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
Minimum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
...
22 01 00 00 01 00 00 00 - 00 00 00 00 00 02 00 00
00 19 4E 7E 01 EC 64 64 - 50 50 50 50 46 46 46 46
00 00 00 00 C1 5C 73 03 - 03 34 1D 87 90 F0 F0 F0
F0 00 00 00 00 08 08 08 - 08 48 00 48 00 48 00 48
00 48 00 48 00 48 00 48 - 00 48 00 48 00 48 00 48
00 70 80 B8 C8 D4 00 00
--- Trailer ---
Disc Manufacturer ID: 56 45 52 42 41 54 h <VERBAT>
Media Type ID: 49 4D 66 <IMf>
Time Stamp [m:y]: 0 : 0000 (00 00 h)
Product Revision Number: 0
20:56:25 #16 SPTI -1066 File SCSIPassThrough.cpp, Line 225
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x093e6ac0: Len x648
20:56:25 #17 Text 0 File BD.cpp, Line 416
Allocated spare area size on disc ca0000h
BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
spare area allocation: default (no action) (0), Stream recording: NO (0); return code 0
20:56:25 #18 Text 0 File ThreadedTransfer.cpp, Line 275
Pipe memory size 83836800
21:05:18 #19 SPTI -1135 File SCSIPassThrough.cpp, Line 225
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x2A 00 00 3E 2D 20 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x0ca5bc00: Len x10000
0x70 52 B6 7C 93 1E B9 4E 0F E0 61 5C 15 B5 D3 B5
0x71 9B B4 C8 72 B0 C5 FE 54 6B B3 FF 22 F2 AD B7
0x4D 0D 74 FD DF 1F 33 33 37 6A F0 C6 E5 4F 8F AE
21:05:18 #20 TRANSFER -20 File ThreadedTransfer.cpp, Line 1235
Could not perform Write
21:05:18 #21 CDR -1135 File Writer.cpp, Line 340
Write error
E: ASUS BW-16D1HT
21:05:46 #22 Text 0 File DVDPlusDualLayer.cpp, Line 1464
SetDriveCaps: Set LAST LBA of layer 1 to 0
21:05:46 #23 PHASE 38 File dlgbrnst.cpp, Line 2066
Burn process failed at 4x (17.980 KB/s)
21:05:46 #24 Text 0 File SCSIPTICommands.cpp, Line 454
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
21:05:46 #25 Text 0 File Cdrdrv.cpp, Line 12266
DriveLocker: UnLockVolume completed
21:05:46 #26 Text 0 File SCSIPTICommands.cpp, Line 617
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
ich habe seit heute diesen Brenner ASUS BW-16D1HT FW 3.01
Wenn ich nun eine ISO auf Disk brennen möchte, bricht nach kurzer Zeit der Brennvorgang ab!
Brennprogramm Nero 2014
Vielleicht weiß jemand einen Rat! Danke
Hier die Logdatei:
1040-01A5-534L-4374-A5XH-XAAA-****-****
X028-0083-29A5-AX8W-230U-91AM-****-****
Windows NT based 6.2
AMD64
Wow64Process
Nero Version: 15.0.25.0
Internal Version: 15,0,25,0
Recorder : <ASUS BW-16D1HT> FW version: 3.01 - HA 1 TA 0 - 15.0.25.0
Device bus : <> HA 1
Host system bus : <S-ATA>
Drive buffer : 4064kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD/DVD-ROM : <ASUS BW-16D1HT > FW version: 3.01 - HA 1 TA 0 - 15.0.25.0
Device bus : <> HA 1
Host system bus : <S-ATA>
=== Scsi-Device-Map ===
: ASUS BW-16D1HT 3.01 storahci Port 0 ID 0 DMA: Off
: Hitachi HCS5C3232SLA380 storahci Port 0 ID 0 DMA: Off
=== CDRom-Device-Map ===
ASUS BW-16D1HT E: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 29 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.9.2019
BD-Image brennen
20:56:24 #1 Text 0 File SCSIPTICommands.cpp, Line 617
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
20:56:24 #2 PHASE 214 File dlgbrnst.cpp, Line 2066
Generation of disc structures started
20:56:25 #3 PHASE 215 File dlgbrnst.cpp, Line 2066
Generation of disc structures completed
20:56:25 #4 Text 0 File Burncd.cpp, Line 3647
Turn on Disc-At-Once, using Blu-ray Disc media
20:56:25 #5 Text 0 File DlgWaitCD.cpp, Line 334
[E: BW-16D1HT ] Total disc capacity: 24438784 47732MB
User data to be written: 22770944 44474MB
Free space on disc: 24438784 47732MB
20:56:25 #6 Text 0 File DlgWaitCD.cpp, Line 346
[E: BW-16D1HT ] Write in overburning mode: NO (enabled: CD)
20:56:25 #7 Text 0 File DlgWaitCD.cpp, Line 3034
Recorder: ASUS BW-16D1HT, Media type: BD-R (seq)
20:56:25 #8 Text 0 File DlgWaitCD.cpp, Line 537
[E: BW-16D1HT ] >>> Protocol of DlgWaitCD activities: <<<
=========================================
20:56:25 #9 Text 0 File ThreadedTransferInterface.cpp, Line 879
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Modus 1)
2 indices, index0 (150) not provided
original disc pos #0 + 22770944 (22770944) = #22770944/5060:12.44
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 22770944 blocks [E: ASUS BW-16D1HT]
--------------------------------------------------------------
20:56:25 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1095
Prepare [E: ASUS BW-16D1HT] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 46634893312, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 22770944 | 22770944 | 0x00
22770944 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
MediaType: BD-R DL
20:56:25 #11 Text 0 File SCSIPTICommands.cpp, Line 404
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
20:56:25 #12 Text 0 File Burncd.cpp, Line 4517
Caching options: cache CDRom or Network-No, small files-No (<64KB)
20:56:25 #13 PHASE 36 File dlgbrnst.cpp, Line 2066
Burn process started at 4x (17.980 KB/s)
20:56:25 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2926
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
20:56:25 #15 Text 0 File Cdrdrv.cpp, Line 10814
---- Disc Structure (BD): Disc Information on BD (00h) ----
Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 4098
--- Header ---
Disc Information Identifier: <DI>
Disc Information Format: 01 h
Number of DI Units/Aux Frames in each DI block: 10
Number of (recording) layer to which this DI Unit applies: 0
DI unit Sequence Number in DI Block: 0
Continuation flag: Next DI Unit is the start of a new set of parameters (0)
Number of DI bytes in use in this DI unit: 98
--- Body ---
Disc Type Identifier: <BDR>
Disc Size/Class/Version: 1
DI Unit Format dependent contents:
BD Structure: 34 (22 h):
2 recording layer (DL), BD-R
Hybrid Disc identifier/Channel bit length: 1 (1 h):
no DVD layer present, no CD layer present
channel bit length of 74,5 nm (25.0 GB max. per layer)
Push-Pull polarity flag bits: 00 h
Recorded mark polarity flag bits: 00 h
BCA descriptor: BCA-code present (1)
Maximum transfer rate needed by the application: 0 Mbit/s
Data zone allocation:
First Physical ADIP Address of the Data Zone of the related layer (FAA): 00020000 h (131072)
Last Physical ADIP Address of the Data Zone of the related layer (LAA): 00194E7E h (1658494)
Recording velocities:
Nominal Recording Velocity: 4.92 m/s (1EC h)
Maximum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
Minimum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
...
22 01 00 00 01 00 00 00 - 00 00 00 00 00 02 00 00
00 19 4E 7E 01 EC 64 64 - 50 50 50 50 46 46 46 46
00 00 00 00 C1 5C 73 03 - 03 34 1D 87 90 F0 F0 F0
F0 00 00 00 00 08 08 08 - 08 48 00 48 00 48 00 48
00 48 00 48 00 48 00 48 - 00 48 00 48 00 48 00 48
00 70 80 B8 C8 D4 00 00
--- Trailer ---
Disc Manufacturer ID: 56 45 52 42 41 54 h <VERBAT>
Media Type ID: 49 4D 66 <IMf>
Time Stamp [m:y]: 0 : 0000 (00 00 h)
Product Revision Number: 0
20:56:25 #16 SPTI -1066 File SCSIPassThrough.cpp, Line 225
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x093e6ac0: Len x648
20:56:25 #17 Text 0 File BD.cpp, Line 416
Allocated spare area size on disc ca0000h
BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
spare area allocation: default (no action) (0), Stream recording: NO (0); return code 0
20:56:25 #18 Text 0 File ThreadedTransfer.cpp, Line 275
Pipe memory size 83836800
21:05:18 #19 SPTI -1135 File SCSIPassThrough.cpp, Line 225
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x2A 00 00 3E 2D 20 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x0ca5bc00: Len x10000
0x70 52 B6 7C 93 1E B9 4E 0F E0 61 5C 15 B5 D3 B5
0x71 9B B4 C8 72 B0 C5 FE 54 6B B3 FF 22 F2 AD B7
0x4D 0D 74 FD DF 1F 33 33 37 6A F0 C6 E5 4F 8F AE
21:05:18 #20 TRANSFER -20 File ThreadedTransfer.cpp, Line 1235
Could not perform Write
21:05:18 #21 CDR -1135 File Writer.cpp, Line 340
Write error
E: ASUS BW-16D1HT
21:05:46 #22 Text 0 File DVDPlusDualLayer.cpp, Line 1464
SetDriveCaps: Set LAST LBA of layer 1 to 0
21:05:46 #23 PHASE 38 File dlgbrnst.cpp, Line 2066
Burn process failed at 4x (17.980 KB/s)
21:05:46 #24 Text 0 File SCSIPTICommands.cpp, Line 454
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
21:05:46 #25 Text 0 File Cdrdrv.cpp, Line 12266
DriveLocker: UnLockVolume completed
21:05:46 #26 Text 0 File SCSIPTICommands.cpp, Line 617
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL