MK-Slinky
Well-Known Member
Thread Starter
- Joined
- May 21, 2015
- Messages
- 169
- Likes
- 14
I've posted this in the CloneBD forum as the issue also affects CloneBD functionality but since only one person replied I'll post it here for better coverage.
Problem
I've noticed recently that with AnyDVD enabled my BD-Writer does not detect a media change to a either blank discs or pre-recorded. Both Blu-ray & DVD discs are affected it makes no difference. (haven't tried CD's)
However....
With AnyDVD disabled this problem does not occur.
Another member posted the same problem here and whilst we are both using drives made by the same manufacturer I do not accept that the drive is at fault. To reiterate the drive works fine and without any issues accept when AnyDVD is running.
With AnyDVD enabled
With AnyDVD disabled
Things that I've tried so far...
Uninstalled the device in Device Manager - (No change)
Moved the device to a different SATA Port - (No Change)
Installed Beta version of AnyDVD v.8.2.2.2 - (No Change)
Tried a new batch of blank Verbatim BD's today - (No Change)
If anyone has an older version of CloneBD I could try that would be very helpful as I only noticed this issue after doing a clean install of Windows 10 64 Bit with a newer version of CloneBD v. 1.1.9.0
Problem
I've noticed recently that with AnyDVD enabled my BD-Writer does not detect a media change to a either blank discs or pre-recorded. Both Blu-ray & DVD discs are affected it makes no difference. (haven't tried CD's)
However....
With AnyDVD disabled this problem does not occur.
Another member posted the same problem here and whilst we are both using drives made by the same manufacturer I do not accept that the drive is at fault. To reiterate the drive works fine and without any issues accept when AnyDVD is running.
With AnyDVD enabled
With AnyDVD disabled
Things that I've tried so far...
Uninstalled the device in Device Manager - (No change)
Moved the device to a different SATA Port - (No Change)
Installed Beta version of AnyDVD v.8.2.2.2 - (No Change)
Tried a new batch of blank Verbatim BD's today - (No Change)
If anyone has an older version of CloneBD I could try that would be very helpful as I only noticed this issue after doing a clean install of Windows 10 64 Bit with a newer version of CloneBD v. 1.1.9.0
Last edited: