• AnyStream is having some DRM issues currently, Netflix is not available in HD for the time being.
    Situations like this will always happen with AnyStream: streaming providers are continuously improving their countermeasures while we try to catch up, it's an ongoing cat-and-mouse game. Please be patient and don't flood our support or forum with requests, we are working on it 24/7 to get it resolved. Thank you.

clone cd failed to burn to pioneer dvd

J

jaywindy

Well-Known Member
Thread Starter
Joined
Aug 28, 2007
Messages
48
Likes
0
Hi, i have been pulling my hair out trying to get clone cd to work. I have been using it for years but it wont work on my new pc.Every copy it reads ok then starts to write and fails at about 10-20% in. I have tried all the suggestions on the above, even removed most of the other programs to a minimum, but nothing seems to help. Nero will copy the discs ok and i may have to resign to using nero, but i do like clone cd and it has been usefull to copy protected cds b4. There seems to be a lot of complaints the same as mine on google, but i have found no straight answers, Any Advice would be appreciated.
Thanks
jay.
 
1. Update your burner's firmware (if available)
http://forum.slysoft.com/showpost.php?p=12794&postcount=10

2. Use good quality media (Memorex, Ritek, Princo, Fuji, TDK from Costco, and Maxell that are not made in Japan are not good quality media). Are you using inferior blank media? If you're not using Taiyo Yuden Premium, Verbatim, Maxell Plus, or Maxell Broadcast Quality, then chances are the answer is yes.
If you use poor quality blank media, then you should expect problems.
visit http://www.redflagdeals.com/forums/showpost.php?p=4764653&postcount=25
and
http://www.redflagdeals.com/forums/showthread.php?p=3976250

3. Try lowering your burn speed (not below 4x; if you have a 16x burner and 16x rated media try writing to it at 12x instead of 16x; an 8x burn speed on 16x rated media wouldn't be a bad idea either)

4. Avoid sticker labels (they tend to cause problems)

5. If you have an ide burner and XP, Click this

Do what it says to do.

6. a) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
(it's also an excellent program imo)

b) Go to Tools > Filter Driver Load Order. Click "Clipboard". Then paste the information you pasted into your clipboard into your next post (ctrl-v).
 
re :advice

Hi,

Thanks for the advice, i am using verbatim discs and with latest firmware.
Re item 5, i have XP and ide burners, however i was not sure which driver needed changing, i have the following:

intel ich9 2 port serial ata storage controller 2 2926
intel ich9 4 port serial ata storage controller 1 2920
primary ide channel
primary ide channel
secondary ide channel
secondary ide channel

your post indicates it is one of the first two, but which?

I have copied the imageburn log as requested.

===============================================
Filter Driver Load Order - ImgBurn v2.3.2.0
===============================================

Upper Device Filter: redbook
Upper Class Filter: GEARAspiWDM
Device: CD/DVD-ROM Device
Lower Class Filter: Pfc
Lower Class Filter: ULCDRHlp
Lower Class Filter: ElbyCDFL
Lower Device Filter: imapi

Filter Name: redbook
File Name: C:\WINDOWS\system32\DRIVERS\redbook.sys
File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
File Description: Redbook Audio Filter Driver
Product Name: Microsoft® Windows® Operating System
Product Version: 5.1.2600.2180
Company Name: Microsoft Corporation
Copyright: © Microsoft Corporation. All rights reserved.

Filter Name: GEARAspiWDM
File Name: C:\WINDOWS\system32\Drivers\GEARAspiWDM.sys
File Version: 2.033 [2.0.3.3]
File Description: CDRom Class Filter Driver
Product Name: GEAR.wrks
Product Version: 7.xx [2.0.3.3]
Company Name: GEAR Software Inc.
Copyright: Copyright (c) GEAR Software Inc. 2004

Filter Name: Pfc
File Name: C:\WINDOWS\system32\drivers\pfc.sys
File Version: 2, 5, 0, 201 [2.5.0.201]
File Description: Padus(R) ASPI Shell
Product Name: Padus(R) ASPI Shell
Product Version: 2, 5, 0, 201 [2.5.0.201]
Company Name: Padus, Inc.
Copyright: (C) Padus, Inc. 1999-2001. All rights reserved.

Filter Name: ULCDRHlp
File Name: C:\WINDOWS\System32\Drivers\ULCDRHlp.sys
File Version: 1, 0, 1, 7 [1.0.1.7]
File Description: ULCDRHlp driver
Product Name: Ulead CD/DVD Burning Engine
Product Version: 1, 0, 1, 7 [1.0.1.7]
Company Name: Ulead Systems, Inc.
Copyright: Copyright (c) 2003 Ulead Systems, Inc.,

Filter Name: ElbyCDFL
File Name: C:\WINDOWS\System32\Drivers\ElbyCDFL.sys
File Version: 5, 2, 1, 3 [5.2.1.3]
File Description: ElbyCDIO Filter Driver
Product Name: CloneCD
Product Version: 5, 2, 1, 3 [5.2.1.3]
Company Name: SlySoft, Inc.
Copyright: Copyright (C) 2003 - 2006 SlySoft, Inc.

Filter Name: imapi
File Name: C:\WINDOWS\system32\DRIVERS\imapi.sys
File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
File Description: IMAPI Kernel Driver
Product Name: Microsoft® Windows® Operating System
Product Version: 5.1.2600.2180
Company Name: Microsoft Corporation
Copyright: © Microsoft Corporation. All rights reserved.
===============================================
Filter Driver Load Order - ImgBurn v2.3.2.0
===============================================
Thanks


Jay

;)
 
jaywindy said:
Hi,

Thanks for the advice, i am using verbatim discs and with latest firmware.
Re item 5, i have XP and ide burners, however i was not sure which driver needed changing, i have the following:

intel ich9 2 port serial ata storage controller 2 2926
intel ich9 4 port serial ata storage controller 1 2920
primary ide channel
primary ide channel
secondary ide channel
secondary ide channel
Click to expand...

No. Leave your serial ata controllers alone. The issue has to do with using non-Micrsoft ide busmaster controllers.


Filter Name: ULCDRHlp
File Name: C:\WINDOWS\System32\Drivers\ULCDRHlp.sys
File Version: 1, 0, 1, 7 [1.0.1.7]
File Description: ULCDRHlp driver
Product Name: Ulead CD/DVD Burning Engine
Product Version: 1, 0, 1, 7 [1.0.1.7]
Company Name: Ulead Systems, Inc.
Copyright: Copyright (c) 2003 Ulead Systems, Inc.,
Click to expand...


Part of Ulead CD/DVD writing engine. Comes with either Audio DVD creator or DVD Moviefactory 4

What I quoted is the only odd filter that I've never seen before, actually. I have no idea whether that would cause issues. You may want to try uninstalling Ulead software on your system (ensure the filter I quoted no longer appears) to see if your issue goes away.
 
Last edited:
Hi.
Problem solved, although i dont know the cause.
I am now using a SATA pioneer burner and clonecd works fine, as long as i read and write to the sata drive. Why? i dont know, but it works.

Thanks for the help.

jeff
 
You must log in or register to reply here.
Back
Top