• AnyStream is having some DRM issues currently, Netflix is not available in HD for the time being.
    Situations like this will always happen with AnyStream: streaming providers are continuously improving their countermeasures while we try to catch up, it's an ongoing cat-and-mouse game. Please be patient and don't flood our support or forum with requests, we are working on it 24/7 to get it resolved. Thank you.

Problem With burning X360 backups

Brutus

Member
Thread Starter
Joined
Aug 28, 2007
Messages
5
Likes
0
Hi guys, i have a problem with burning backups for my Xbox 360.

I select 1x or 2-2,4x speed and still it burns at about 4x. Goes up to 50% ant then stops and nothing happens :(

Wasted 3 discs

I have a LiteOn LH-18A1P and use Verbatim and philips dvd+r

Help :)
 
1. You need double layer discs (Verbatim +R DL) .

2. You need to modify your x-box 360

3. You'd be better off asking in the thread Detroitbaseball posted.
 
Last edited:
That doesn't help a lot :( the problem is with clonecd, i burned xbox 360 games earlier and there was no problem and the speed was fine (2x as selected) now it speeds up to 4X no matter what speed i select and burning freezes at 52% :(

You need double layer discs (Verbatim +R DL).
 
1. You need double layer discs (Verbatim +R DL) .

2. You need to modify your x-box 360

3. You'd be better off asking in the thread Detroitbaseball posted.

Just a mistake, of course i use DL discs ;)
 
Just a mistake, of course i use DL discs ;)

Is the freezing happening with Verbatim + R DL (made in singapore)?

If so, I have no idea what your issue is then (possibly a dying burner). At 52% it would be hanging right around the layer break position.
 
Is the freezing happening with Verbatim + R DL (made in singapore)?

If so, I have no idea what your issue is then (possibly a dying burner). At 52% it would be hanging right around the layer break position.

Exactly these discs and Philips dvd dl.

And yes, it looks like it can't burn the second layer.
Tried upgrading firmware, Clonecd and still the same :(

And it was burning perfectly only a week ago and hasn't been used since yesterday.
 
Ahhh, all fine now, looks like the problem was Nero sotware I installed.
It did something to the drivers prehaps.

Uninstalled it and clonecd works prefectly again :)

Thanks for the help and a quick response guys anyway :)
 
Ahhh, all fine now, looks like the problem was Nero sotware I installed.
It did something to the drivers prehaps.

Uninstalled it and clonecd works prefectly again :)

Thanks for the help and a quick response guys anyway :)


You must have had Incd installed, which is packet writing software. Nero's Incd conflicts with a lot things.
If you want drag-and-drop functionality use dvd-ram instead, which is more stable. Nero burning rom
does not conflict with Clonecd--but Nero's Incd can.

Sorry, I should have asked you to post your filters before.
 
Back
Top