• AnyStream is having some DRM issues currently, Netflix is not available in HD for the time being.
    Situations like this will always happen with AnyStream: streaming providers are continuously improving their countermeasures while we try to catch up, it's an ongoing cat-and-mouse game. Please be patient and don't flood our support or forum with requests, we are working on it 24/7 to get it resolved. Thank you.

Problem mit Jack Reacher 2 BD

K

krebsi76

Guest
folgendes Problem mit Jack Reacher 2 beim Rippen, nur Hauptfilm. Tools wie ts Muxer, Clown BD von mike_r bzw. MakeMKV produzieren Fehlermeldungen und brechen ab. Bei ts Muxer, läuft zwar durch, aber Bild und Ton anschließend asyncron. Ich nehme mal an das die BD defekt ist. Ein komplettes ISO konnte ich erstellen. Ich hänge trotzdem eine LOG Datei an.
 

Attachments

  • AnyDVD_8.1.1.1_Info_D_Jack_Reacher_Never_Go_Back.ziplog
    227.6 KB · Views: 2
Ja... aber... wie lauten denn nun diese Fehlermeldungen?
 
Wrong section, moved. Not an AnyDVD problem. In order to cause it off sync audio/video it must be recoded. That is NOT something AnyDVD is capable to do. Your problem is with TSmuxer, handbrake and/or makemkv. According to the logfile decryption went just fine. Try playing the RIP DIRECTLY in something like PowerDVD. If everything is in sync there, then AnyDVD did it's job. In that case, try CloneBD.

Verstuurd vanaf mijn Nexus 6P met Tapatalk
 
Ja... aber... wie lauten denn nun diese Fehlermeldungen?
Clown BD sagt mir bei 66% "Disk Demaged" an und bricht ab, weil zuviele Lesefehler. Direkt von der BD. ts muxser zeigt mir unzählige bad frames an und an dieser Stelle laufen Bild und Ton asyncron.
Wrong section, moved. Not an AnyDVD problem. In order to cause it off sync audio/video it must be recoded. That is NOT something AnyDVD is capable to do. Your problem is with TSmuxer, handbrake and/or makemkv. According to the logfile decryption went just fine. Try playing the RIP DIRECTLY in something like PowerDVD. If everything is in sync there, then AnyDVD did it's job. In that case, try CloneBD.

Verstuurd vanaf mijn Nexus 6P met Tapatalk

ist mir schon klar, immerhin konnte ich die komplette BD auf die Festplatte Rippen. Beim schnellen sichten des Films mit VLC sind trotzdem Fehler (Frame Drops) aufgetreten, aber Bild und Ton laufen syncron.
 
Last edited by a moderator:
VLC is not a licensed Blu-ray player so dropped frames aren't unusual. There's a reason I asked to play the rip in PowerDVD. But if even the rip plays in sync with VLC, then you just confirmed it yourself. AnyDVD did it's job, there's a slim chance of a faulty rip but unlike. Rerip the original and try again. Either way, not an AnyDVD issue.

Verstuurd vanaf mijn Nexus 6P met Tapatalk
 
vlcsnap-2017-04-19-12h32m56s118.png
VLC is not a licensed Blu-ray player so dropped frames aren't unusual. There's a reason I asked to play the rip in PowerDVD. But if even the rip plays in sync with VLC, then you just confirmed it yourself. AnyDVD did it's job, there's a slim chance of a faulty rip but unlike. Rerip the original and try again. Either way, not an AnyDVD issue.

Verstuurd vanaf mijn Nexus 6P met Tapatalk
mit PowerDVD gibt es keine Frame Drops direkt von der BD auch nicht von der Kopie, außer mit dem Unterschied das die Laufzeit weit über 2 Stunden ist. Die Filme schaue ich mir eigentlich über den DUNE HD Smart H1 an und nicht am PC.
Der Dune zeigt mir ebenfalls ab ca. 1:12:00 einige Frame Drops an. Bild und Ton bleiben aber syncron vom BD Image. Ich habe mir nur die m2ts Datei auf die externe Festplatte kopiert. Übrigens mit der 8.1.1.2 bringt der ts muxer auch bad frames als Fehlermeldung. Da es nur eine Leih BD ist, habe leider keine Zeit um alles mögliche auszuprobieren.Tut mir leid, aber mehr Infos kann ich euch nicht geben. Und ich weis, dass das kein AnyDVD Problem ist, sonst hätte ich ja kein Backup der BD anlegen können. Warum mir PowerDVD keine Frame Drops anzeigt, aber der VLC und der Dune HD ist mir ein Rätsel. Filme mit solchen Frame Drops hatte ich mal bei Madagascar 3 und American Hustler.
 
Last edited by a moderator:
It's very simple why PowerDVD doesn't have frame drops and everything is in sync and the others do. Neiter the dune, VLC... PowerDVD is a licensed Blu-ray playback software, the others aren't.

Since you say with PowerDVD everything behaves correctly then AnyDVD did it's job. For conversion things, try CloneBD instead.

Verstuurd vanaf mijn Nexus 6P met Tapatalk
 
It's very simple why PowerDVD doesn't have frame drops and everything is in sync and the others do. Neiter the dune, VLC... PowerDVD is a licensed Blu-ray playback software, the others aren't.

Since you say with PowerDVD everything behaves correctly then AnyDVD did it's job. For conversion things, try CloneBD instead.

Verstuurd vanaf mijn Nexus 6P met Tapatalk

auch mit CloneBD Probleme beim Kopieren direkt von der BD. Siehe Anhang. test1.jpg
 
Try going into CloneBD settings and enable 'read from file system'. See if that helps if. It's also recommended to rip to HDD first for faster processing. If it doesn't, please post in the CloneBD (de) section (or English of you can write it) and attach that image and a CloneBD logfile.

Verstuurd vanaf mijn Nexus 6P met Tapatalk
 
test2.png test3.jpg View attachment 33353 View attachment 33352 View attachment 33352
Try going into CloneBD settings and enable 'read from file system'. See if that helps if. It's also recommended to rip to HDD first for faster processing. If it doesn't, please post in the CloneBD (de) section (or English of you can write it) and attach that image and a CloneBD logfile.

Verstuurd vanaf mijn Nexus 6P met Tapatalk
der komplette Inhalt der BD liegt bereits auf der Festplatte. Mit den oben genannten Tools stolpern alle bei ca. 66%, egal ob von der Festplatte oder BD. Versuche derzeit von der HDD eine Kopie zu erzeugen mit CloneBD. Es erscheinen auch Warnmeldungen. Muss jetzt leider den Film wieder abgeben. Aber eine funktionierende Version mit einigen Frame Drops hab ich ja.
 
Last edited by a moderator:
Could you please create a topic in the CloneBD section, with as much details you can think of? Attach those images AND a CloneBD logfile. Then the developers can take a look.

Please be informed though that read errors on a Blu-ray disc are ALWAYS a defective disc and/drive. NEVER a protection issue.

Verstuurd vanaf mijn Nexus 6P met Tapatalk
 
That is NOT a CloneBD logfile. That's the debug output. Click the big blue button on the final screen of CloneBD.

CloneBD logfile: https://forum.redfox.bz/index.php?threads/70670/

Verstuurd vanaf mijn Nexus 6P met Tapatalk

ich kann leider die log datei nicht erstellen, es fehlt der button zum erstellen, weil ich die bd nicht mehr habe, nur geliehen. das häckchen bei "debug log zeigen" ist gesetzt. mehr kann ich nicht mehr tun. "log datei erstellen" geht anscheinend nur von der bd selber, nicht von der festplatte.
 
Last edited by a moderator:
What the source is (original disc, or HDD rip) doesn't matter for the logfile button to appear. All that needs to happen is for the encode to either fail or complete. Without a CloneBD logfile (see that link, post 3, schritt 2) there's nothing the developers can do.
 
der screenshot von post #8 kommt von der orginal disc (nicht mehr verfügbar), der restlichen screenshots stammen von der hdd, als source. der log button erscheint nur, wenn ich vorher abbreche, wenn die ersten warnugen erscheinen.
 

Attachments

  • jack reacher 2 log.cbdlog
    332.5 KB · Views: 1
@Pete or @Reto can you take a look please. I don't have the tools at my disposal to go into further technical stuff
 
Back
Top