acidflash
Active Member
Thread Starter
- Joined
- May 2, 2016
- Messages
- 26
- Likes
- 1
I'm seeing some issues also with CloneBD 1.1.2.0. I'm using a laptop with 4K display (scaling set to 250) and an extended second monitor, full HD, (scaling set to 100). I know these two resolutions don't always play together well, but on the 4K screen, the CloneBD text is very tiny. When I drag the cloneBD window to the full HD screen, I see random behavior. In full screen mode the window completely vanishes, and in minimized mode, the window usually fills the entire screen, or just completely vanishes. I didn't see these issues with the previous version of CloneBD, and also don't see the problem with any other applications.
I use it on my laptop with a UHD screen and have to have the scaling set higher otherwise everything is impossible to read. Elby should sort out the scaling as it's easy to do. I've set up a replacement manifest file to fix the issue until they do
Thanks Pete, I tried scaling=200 and CloneBD does behave better, and I now have more room on this 3840x2160 15" laptop screen. Not sure I'd want to go much smaller, since things are starting to get real tiny.Isn't 250 a bit much? Did you try 150%? I'm using a 4K desktop monitor and I wouldn't voluntarily go any higher than 100%, because that costs too much space (less information), let alone 250% - I tried that, the letters are the size of a thumb then.
Ok, I notified the devs - they'll have to get one of those displays for testing.Thanks Pete, I tried scaling=200 and CloneBD does behave better, and I now have more room on this 3840x2160 15" laptop screen. Not sure I'd want to go much smaller, since things are starting to get real tiny.
Shouldn't matter though, if it scaled properly then it would scale no matter what you have it set to. With the manifest file in place I can scale to 250% and it still looks fine
I just posted a 2nd message about this issue. I remembered another post that mentioned "manifest", before I learned what that was all about. After a search, I got back to this ("Adbear") thread. I'll PM Adbear and see if he will post his manifest file.I use it on my laptop with a UHD screen and have to have the scaling set higher otherwise everything is impossible to read. Elby should sort out the scaling as it's easy to do. I've set up a replacement manifest file to fix the issue until they do