• AnyStream is having some DRM issues currently, Netflix is not available in HD for the time being.
    Situations like this will always happen with AnyStream: streaming providers are continuously improving their countermeasures while we try to catch up, it's an ongoing cat-and-mouse game. Please be patient and don't flood our support or forum with requests, we are working on it 24/7 to get it resolved. Thank you.

webslinger you can only use anydvd clone dvd

M

moose_218

Member
Thread Starter
Joined
Jun 29, 2007
Messages
6
Likes
0
what the heck is region code

anydvd 6.1.6.5 after it read and burnered it i put it back in to read it make sure it had a good burn
i get a warning dvd dirty, clean, bad media but i went through 20 dvd-r's then the other it say's its region codes assign a region this didn't happen until i updated it a few weeks ago burned fine
 
what the heck is region code

anydvd 6.1.6.5 after it read and burnered it i put it back in to read it make sure it had a good burn
i get a warning dvd dirty, clean, bad media but i went through 20 dvd-r's then the other it say's its region codes assign a region this didn't happen until i updated it a few weeks ago burned fine
can you turn off the region code or what can i do
 
http://forum.slysoft.com/showthread.php?t=5091

14. Anydvd pops up with a message everytime I place this one dvd in the drive. The error message says unable to find CSS key due to region mismatch and that I need to set my dvd drive region to the same as the dvd to avoid this error in the future. Does anyone know how to do this?

a) You can usually ignore that error message, and Anydvd will still work properly with your burning program.

b) If you're still having problems, this is what you do

i. Right click the fox on your toolbar. Exit Anydvd
ii. Click start. Right click on "My computer"--->select "properties".
iii.Click on the 'Hardware' tab--->click the 'device manager' button.
iv. Open the dvd/cdrom branch---> right click on your optical drive
v. Click "properties".
vi. You should have a region tab. From there you can select a region.
vii. Select the region that matches the region on the disc
viii. Start Anydvd
ix. click the fox icon on your toolbar. Go to Video dvd--->settings
x. Change the default to match the region on the disc
xi. Click Ok
 
for a short period why is that they want you down load a RPC1 patched fireware
 
moose_218 said:
for a short period why is that they want you down load a RPC1 patched fireware
Click to expand...

I honestly have no idea what you're talking about. You can use Anydvd and Clonedvd for the lifetime of the products, provided you purchased them.
 
Thanks webslinger

I tried what you posted it wouldn't let me change the region code i went administrator tools then tried it again no luck. When i put the dvd in my dvd player it freezes i waste a couple more disc
 
moose_218
What brand of DVDRW (burner) and what brand of DVD-R are you using?
 
dvd i use

tdk, hp, magnavox 16x Dvd+r i gonna erase the program put it back in and see what happens...when i get done burning a dvd and check it to see if it copy right thats when i get bad media, dvd dirty something about region codes i check it there both the same..or i put it in a dvd player it pauses and picture screws up
 
moose_218 said:
tdk, hp, magnavox 16x Dvd+r
Click to expand...

Don't. Use Verbatim, Taiyo Yuden (Premium) 8x, Maxell Plus, or Maxell Broadcast Quality.

or i put it in a dvd player it pauses and picture screws up
Click to expand...

That's because you're using junk blank media.

1. Update your burner's firmware (if available)
http://forum.slysoft.com/showpost.php?p=12794&postcount=10

2. Use good quality media (Memorex, Ritek, Princo, Fuji, TDK from Costco, and Maxell that are not made in Japan are not good quality media). Are you using inferior blank media? If you're not using Taiyo Yuden Premium, Verbatim, Maxell Plus, or Maxell Broadcast Quality, then chances are the answer is yes.
If you use poor quality blank media, then you should expect problems.
visit http://www.redflagdeals.com/forums/showpost.php?p=4764653&postcount=25
and
http://www.redflagdeals.com/forums/showthread.php?p=3976250


3. Try lowering your burn speed a little (if you have a 16x burner and 16x rated media try writing to it at 12x or 8x instead of 16x)

4. If you're using +R, +RW, or +R DL media, change the booktype to "dvd-rom"
http://forum.slysoft.com/showthread.php?t=476 (step 3)

5. Avoid sticker labels (they tend to cause problems)

6. Try setting a custom size of 4300 in whatever burning program you're using (but if you're using good media, you shouldn't have to) if you're using regular single layer dvd-5 (4.7GB) discs.

7. Download Nero cd-dvd speed. It's a free program. Select the tab labeled "scandisc". Insert the problematic backup disc, select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your backup is bad (which is the most likely case), your optical drive may be slowly dying, or your optical drive simply doesn't like the disc (or your choice of blank media)--even if the disc looks fine.

Bad burn quality is notorious around the end of discs (see step 6)
and also at layer breaks when using low quality DL media (use Verbatim +R DL media made in Singapore, and change the booktype to "dvd-rom")
 
Trying to find fireware 4 lite-on dvdrw 16x dual layer sohw-1693s

And what a pain it it is, how long does a burner last it reads the disc but when it burns it screws up thanks all for the replys
 
moose_218 said:
And what a pain it it is, how long does a burner last it reads the disc but when it burns it screws up thanks all for the replys
Click to expand...

Quit using inferior blank media. Use Taiyo Yuden 8x Premium, Verbatim, Maxell Plus, or Maxell Broadcast Quality.
 
You must log in or register to reply here.
Back
Top