Clone dvd2 not ejecting movie at completion

[aprilrose]

Can anyone out there help me.? I have had this problem with Clone DVD and have sent emails to Slysoft help desk for months now. The problem is this.: When my movie is finished its 'writing to disc' program, the choice of ejecting my finished disc won't come up. I have tried blanking out 'the sucessful completions of operations box", explained the problems to the programers at SlySoft (which they fixed for about a week, then when a new update is given to me, the problem is back on.) and changing my blank burning dvd's... Does anyone else have this problem and can suggest a solution??? To retrieve my finished movie I have had to do a cold shut down of my computer which can't be good for it...Thanks in advance to anyone that can help me with this.

 

[Webslinger]

1. Elaborate Bytes is the official developer of Clonedvd--not Slysoft. Consequently, you may find it more useful to contact Elaborate Bytes

2. Refer to question 4 from here (click "here") as this issue has already been addressed in the FAQ sticky, and you might find the answer there.

 

[James]

Can anyone out there help me.? I have had this problem with Clone DVD and have sent emails to Slysoft help desk for months now. The problem is this.: When my movie is finished its 'writing to disc' program, the choice of ejecting my finished disc won't come up. I have tried blanking out 'the sucessful completions of operations box", explained the problems to the programers at SlySoft (which they fixed for about a week, then when a new update is given to me, the problem is back on.) and changing my blank burning dvd's... Does anyone else have this problem and can suggest a solution??? To retrieve my finished movie I have had to do a cold shut down of my computer which can't be good for it...Thanks in advance to anyone that can help me with this.

It sounds to me, that a firmware update of your writer might help you, it looks like your writer hangs at the end of the burn.
Using +R media might work, too.

 

[aprilrose]

James, what do you mean a firm update of my writer.? Right now I am using FujiFilm blank dvd disc's, 4.7 gb. Could you break it down for me. Thanks in advance, AprilRose

 

[Webslinger]

1. Update your burner's firmware (if available)
http://forum.slysoft.com/showpost.php?p=12794&postcount=10

2. Use good quality media (Memorex, Ritek, Princo, Fuji (not made in Japan), TDK from Costco, and general Maxell that you can find in most stores (not made in Japan) are not good quality media). Are you using inferior blank media? If you're not using Taiyo Yuden Premium, Verbatim, Maxell Plus, or Maxell Broadcast Quality, then chances are the answer is yes.
If you use poor quality blank media, then you should expect problems.
visit http://www.redflagdeals.com/forums/showpost.php?p=4764653&postcount=25
and
http://www.redflagdeals.com/forums/showthread.php?p=3976250

3. Try lowering your burn speed (not below 4x; if you have a 16x burner and 16x rated media try writing to it at 12x instead of 16x; an 8x burn speed on 16x rated media wouldn't be a bad idea either)

4. Avoid sticker labels (they tend to cause problems)

5. Try setting a custom size of 4300 in Clonedvd (but if you're using good media, you shouldn't have to) if you're using regular single layer dvd-5 (4.7GB) discs.


Bad burn quality is notorious around the end of discs (see step 5)
and also at layer breaks when using low quality DL media (use Verbatim +R DL media made in Singapore, and change the booktype to "dvd-rom")



read http://forum.slysoft.com/showthread.php?t=476 fully please

 

[Webslinger]

1. Iolo Antivirus with System Mechanic issue

I recently had problems with CloneDVD when writing to a blank DVD, I kept getting an error at 99%. I figured out that System Mechanic 7 Pro with Iolo Antivirus was the culprit.

Now before I start AnyDVD and then CloneDVD, I turn off the iolo antivirus and everything is working fine again.

source http://forum.slysoft.com/showthread.php?t=4027

It seems reasonable to suspect other Antivirus programs might interfere as well.

2. Disable the .wav sound that plays at the end of the burn

It may be hanging on the .wav file at the end of the burn.
Click on the preferences tab in Clonedvd, blank the "successful completion of operations" box, and see if this resolves your problem.
You can use the browse button next to it to reinstate success .wav

source http://forum.slysoft.com/showpost.php?p=12096&postcount=8

3. Try a custom size of 4300 if you're using regular single layer blank media

Try setting a custom size of 4300 near the quality bar in Clonedvd (but if you're using good media, such as Taiyo Yuden Premium, Verbatim, Maxell Plus, or Maxell Broadcast Quality, you shouldn't have to) if you're using regular single layer dvd-5 (4.7GB) discs. Bad burn quality is notorious around the end of discs. Using a custom disc size of 4300 ensures you won't be burning to the end.

 

[Webslinger]

All this (and other exciting information) is found in the FAQ sticky at the top of the forum. :agree: