• AnyStream is having some DRM issues currently, Netflix is not available in HD for the time being.
    Situations like this will always happen with AnyStream: streaming providers are continuously improving their countermeasures while we try to catch up, it's an ongoing cat-and-mouse game. Please be patient and don't flood our support or forum with requests, we are working on it 24/7 to get it resolved. Thank you.

Problem with Burning DVD

G

gyew

New Member
Thread Starter
Joined
May 17, 2007
Messages
3
Likes
0
When I am burning DVD at 74% towards the end I constantly get an error message of bad media. I have tried to uninstalled and reinstalled the CloneDVD program, change the quality of the DVD to a better one like TDK or Sony and yet still getting the same problem. Can some one assist me in resolving this problem, thank you. :bowdown:
 
When I am burning DVD at 74% towards the end I constantly get an error message of bad media. I have tried to uninstalled and reinstalled the CloneDVD program, change the quality of the DVD to a better one like TDK or Sony and yet still getting the same problem. Can some one assist me in resolving this problem, thank you. :bowdown:
 
gyew said:
.change the quality of the DVD to a better one like TDK or Sony
Click to expand...

How is that better? Use Verbatim, Taiyo Yuden Premium, Maxell Plus, or Maxell Broadcast Quality

1. Update your burner's firmware (if available)
http://forum.slysoft.com/showpost.php?p=12794&postcount=10
2. Use good quality media (Memorex, Ritek, Princo, Fuji, TDK from Costco, and Maxell that are not made in Japan are not good quality media)
If you use poor quality blank media, then you should expect problems.
visit http://www.redflagdeals.com/forums/showpost.php?p=4764653&postcount=25
and
http://www.redflagdeals.com/forums/showthread.php?p=3976250
3. Try lowering your burn speed (not below 4x; if you have a 16x burner and 16x rated media try writing to it at 12x instead of 16x)
4. If you're using +R, +RW, or +R DL media, change the booktype to "dvd-rom"
http://forum.slysoft.com/showthread.php?t=476 (step 3)
5. Avoid sticker labels (they tend to cause problems)
6. Try setting a custom size of 4300 in Clonedvd (but if you're using good media, you shouldn't have to) if you're using regular single layer dvd-5 (4.7GB) discs.


Bad burn quality is notorious around the end of discs (see step 6)
and also at layer breaks when using low quality DL media (use Verbatim +R DL media, and change the booktype to "dvd-rom)
 
I have tried all that you have prescribed but still having the same issue. Do you have any other solution, please? Thank you.:bowdown:
 
gyew said:
I have tried all that you have prescribed but still having the same issue. Do you have any other solution, please? Thank you.:bowdown:
Click to expand...

1. Ensure you are using Anydvd 6.1.5.1 and Clonedvd 2.9.0.6

2. Stop using mediocre blank media and use good blank media for once

3. Do steps 3 and 4 from here
step 4 requires you to post information

4. Test your burner in another system. It may be dying
 
Also make sure your CloneDVDTemp file is empty prior to starting a new session.
 
You must log in or register to reply here.
Back
Top